XGJ used in power factory pellet mill
1.CE
2.double -layer dies ,up and down dual-use
3.high capacity,save energy
XGJ used in power factory pellet mill
XGJ series efficient centrifugal pellet mill is our initiative patented products in china through meticulous research and development. The series pellet mill absorbs the quintessence at home and abroad, the heart part adopts
“double-layer dies”
as the unique structure, the rollers are made by abrasion-proof alloy steel, improving the using life of spare parts greatly. For the drive parts, the grease is filtrated automatically lubricated properly. Special design, rational structure, low power consumption, high efficiency, sturdy and durable, supplying the gap of vertical feeding of ring-die pellet mill at home, reach the international advanced level.
Die vertical die ,feeding vertically ,No arching of raw materials, easy for heating dissipation.
fixed , rollers rotating ,materials centrifugal, evenly distributed around.
Double-layer dies , up and down dual-use, high capacity, saving energy.
Independent lubrication,high pressure filrtation ,clean and unblocked.
Independent and frequency changeable cutting device, ensure formation rate of pellets.
model
Capacity(t/h)
Power(kw)
Pellet specification(mm)
Weight(t)
Size(mm)
XGJ550
0.8-1.2
75
4-12
6.04
2630×100×2400
XGJ560
1-1.5
90
4-12
6.1
2600×1300×2300
XGJ580
1.5-2.5
160
4-12
7
2900×1300×2400
XGJ850
2.5-3.5
220
4-12
14.5
3800×1400×3100
XGJ880
3-5
315
4-12
18
3800×1680×3400
The equipment is applied to the materials with low adhesiveness and low shaping,
such as the rice husk, sunflower seed husk, peanut shell and other fruit shell, branch trunk, bark and other wood waste ,a variety of corp straws, rubber, cement, ash and other chemical materials .this type of pellet mill is widely used in the biomass-energy fuels plant, wood processing plant, fertilizer plant, chemical plant etc. it is the ideal pressing shaping equipments with low investment and high profit.
Saturday, October 15, 2011
XGJ550 pellet mill
XGJ550 pellet mill
1.CE approved
2.veitical feed opening
3.double-layer dies,high capacity
4.save energy
XGJ550 pellet mill
vertical die ,feeding vertically ,No arching of raw materials, easy for heating dissipation.
Die fixed , rollers rotating ,materials centrifugal, evenly distributed around.
Double-layer dies , up and down dual-use, high capacity, saving energy.
Independent lubrication,high pressure filrtation ,clean and unblocked.
Independent and frequency changeable cutting device, ensure formation rate of pellets.
The equipment is applied to the materials with low adhesiveness and low shaping
,such as the rice husk,sunflower seed husk,peanut shell and other fruit shell,branch trunk,bark and other wood waste,a variety of corp straws,rubber,cement,ash and other chemical materials.this type of pellet mill is widely used in the biomass-energy fuels plant,wood processing plant,fertilizer plant,chemical plant etc.it is the ideal pressing shaping equipments with low investment and high profit.
1.CE approved
2.veitical feed opening
3.double-layer dies,high capacity
4.save energy
XGJ550 pellet mill
vertical die ,feeding vertically ,No arching of raw materials, easy for heating dissipation.
Die fixed , rollers rotating ,materials centrifugal, evenly distributed around.
Double-layer dies , up and down dual-use, high capacity, saving energy.
Independent lubrication,high pressure filrtation ,clean and unblocked.
Independent and frequency changeable cutting device, ensure formation rate of pellets.
The equipment is applied to the materials with low adhesiveness and low shaping
,such as the rice husk,sunflower seed husk,peanut shell and other fruit shell,branch trunk,bark and other wood waste,a variety of corp straws,rubber,cement,ash and other chemical materials.this type of pellet mill is widely used in the biomass-energy fuels plant,wood processing plant,fertilizer plant,chemical plant etc.it is the ideal pressing shaping equipments with low investment and high profit.
XGJ560 fertilizer pellet machine
XGJ560 fertilizer pellet machine
1.CE
2.double-layer dies,high capacity]
3.high efficient
4.saving energy
XGJ560 fertilizer pellet machine
XGJ series efficient centrifugal pellet mill is our initiative patented products in china through meticulous research and development. The series pellet mill absorbs the quintessence at home and abroad, the heart part adopts
“double-layer dies”
as the unique structure, the rollers are made by abrasion-proof alloy steel, improving the using life of spare parts greatly. For the drive parts, the grease is filtrated automatically lubricated properly. Special design, rational structure, low power consumption, high efficiency, sturdy and durable, supplying the gap of vertical feeding of ring-die pellet mill at home, reach the international advanced level.
The equipment is applied to the materials with low adhesiveness and low shaping
, such as the rice husk, sunflower seed husk, peanut shell and other fruit shell, branch trunk, bark and other wood waste ,a variety of corp straws, rubber, cement, ash and other chemical materials .this type of pellet mill is widely used in the biomass-energy fuels plant, wood processing plant, fertilizer plant, chemical plant etc. it is the ideal pressing shaping equipments with low investment and high profit
The distinction of our product:
Die vertical die ,feeding vertically ,No arching of raw materials, easy for heating dissipation.
fixed , rollers rotating ,materials centrifugal, evenly distributed around.
Double-layer dies , up and down dual-use, high capacity, saving energy.
Independent lubrication,high pressure filrtation ,clean and unblocked.
Independent and frequency changeable cutting device, ensure formation rate of pellets.
1.CE
2.double-layer dies,high capacity]
3.high efficient
4.saving energy
XGJ560 fertilizer pellet machine
XGJ series efficient centrifugal pellet mill is our initiative patented products in china through meticulous research and development. The series pellet mill absorbs the quintessence at home and abroad, the heart part adopts
“double-layer dies”
as the unique structure, the rollers are made by abrasion-proof alloy steel, improving the using life of spare parts greatly. For the drive parts, the grease is filtrated automatically lubricated properly. Special design, rational structure, low power consumption, high efficiency, sturdy and durable, supplying the gap of vertical feeding of ring-die pellet mill at home, reach the international advanced level.
The equipment is applied to the materials with low adhesiveness and low shaping
, such as the rice husk, sunflower seed husk, peanut shell and other fruit shell, branch trunk, bark and other wood waste ,a variety of corp straws, rubber, cement, ash and other chemical materials .this type of pellet mill is widely used in the biomass-energy fuels plant, wood processing plant, fertilizer plant, chemical plant etc. it is the ideal pressing shaping equipments with low investment and high profit
The distinction of our product:
Die vertical die ,feeding vertically ,No arching of raw materials, easy for heating dissipation.
fixed , rollers rotating ,materials centrifugal, evenly distributed around.
Double-layer dies , up and down dual-use, high capacity, saving energy.
Independent lubrication,high pressure filrtation ,clean and unblocked.
Independent and frequency changeable cutting device, ensure formation rate of pellets.
XGJ560 pellet mill
XGJ560 pellet mill
1.vertical feed opening
2.double-layer dies,high capacity
3.suitable for hardmaterial
4.saving energy
XGJ560 pellet mill
The equipment is applied to the materials with low adhesiveness and low shaping,such as the rice husk,sunflower seedhusk,peanut shell and other fruit shell,branch,trunk,bark,and other wood waste,a variety of corp straws,rubber,cement,ashand otherchemicalmaterial.this type of pellet mill is widely used in the biomass-energy fuels plant,wood processing plant ,fertilizer plant,cheical plant etc.it is the ideal pressing shaping equipments with low investment and high profit.
Tel:8618764198337
Fax:531-86-83483995
Trademanager:cn202227012
1.vertical feed opening
2.double-layer dies,high capacity
3.suitable for hardmaterial
4.saving energy
XGJ560 pellet mill
The equipment is applied to the materials with low adhesiveness and low shaping,such as the rice husk,sunflower seedhusk,peanut shell and other fruit shell,branch,trunk,bark,and other wood waste,a variety of corp straws,rubber,cement,ashand otherchemicalmaterial.this type of pellet mill is widely used in the biomass-energy fuels plant,wood processing plant ,fertilizer plant,cheical plant etc.it is the ideal pressing shaping equipments with low investment and high profit.
Tel:8618764198337
Fax:531-86-83483995
Trademanager:cn202227012
XGJ580 wood sawdust pellet mill
wood sawdust pellet mill
1.capacity:1.5-2.5t/h
2.power:160kw
3.pellet specification:4-12mm
4.weight:7t
wood sawdust pellet mill
Description of production:
XGJ series efficient centrifugal pellet mill is our initiative patented products in china through meticulous research and development. The series pellet mill absorbs the quintessence at home and abroad, the heart part adopts “double-layer dies” as the unique structure, the rollers are made by abrasion-proof alloy steel, improving the using life of spare parts greatly. For the drive parts, the grease is filtrated automatically lubricated properly. Special design, rational structure, low power consumption, high efficiency, sturdy and durable, supplying the gap of vertical feeding of ring-die pellet mill at home, reach the international advanced level.
Characteristic of production:
1. vertical die ,feeding vertically ,No arching of raw materials, easy for heating dissipation.
2.Die fixed , rollers rotating ,materials centrifugal, evenly distributed around.
3.Double-layer dies , up and down dual-use, high capacity, saving energy.
4.Independent lubrication,high pressure filtration ,clean and unblocked.
5.Independent and frequency changeable cutting device, ensure formation rate of pellets.
Application:
The equipment is applied to the materials with low adhesiveness and low shaping, such as the rice husk, sunflower seed husk, peanut shell and other fruit shell, branch trunk, bark and other wood waste ,a variety of straws, rubber, cement, ash and other chemical materials .this type of pellet mill is widely used in the biomass-energy fuels plant, wood processing plant, fertilizer plant, chemical plant etc. it is the ideal pressing shaping equipments with low investment and high profit.
Models of production:
model
Capacity(t/h)
Power(kw)
Pellet specification(mm)
Weight(t)
Size(mm)
XGJ550
0.8-1.2
75
4-12
6.04
2630×100×2400
XGJ560
1-1.5
90
4-12
6.1
2600×1300×2300
XGJ580
1.5-2.5
160
4-12
7
2900×1300×2400
XGJ850
2.5-3.5
220
4-12
14.5
3800×1400×3100
XGJ880
3-5
315
4-12
18
3800×1680×3400
1.capacity:1.5-2.5t/h
2.power:160kw
3.pellet specification:4-12mm
4.weight:7t
wood sawdust pellet mill
Description of production:
XGJ series efficient centrifugal pellet mill is our initiative patented products in china through meticulous research and development. The series pellet mill absorbs the quintessence at home and abroad, the heart part adopts “double-layer dies” as the unique structure, the rollers are made by abrasion-proof alloy steel, improving the using life of spare parts greatly. For the drive parts, the grease is filtrated automatically lubricated properly. Special design, rational structure, low power consumption, high efficiency, sturdy and durable, supplying the gap of vertical feeding of ring-die pellet mill at home, reach the international advanced level.
Characteristic of production:
1. vertical die ,feeding vertically ,No arching of raw materials, easy for heating dissipation.
2.Die fixed , rollers rotating ,materials centrifugal, evenly distributed around.
3.Double-layer dies , up and down dual-use, high capacity, saving energy.
4.Independent lubrication,high pressure filtration ,clean and unblocked.
5.Independent and frequency changeable cutting device, ensure formation rate of pellets.
Application:
The equipment is applied to the materials with low adhesiveness and low shaping, such as the rice husk, sunflower seed husk, peanut shell and other fruit shell, branch trunk, bark and other wood waste ,a variety of straws, rubber, cement, ash and other chemical materials .this type of pellet mill is widely used in the biomass-energy fuels plant, wood processing plant, fertilizer plant, chemical plant etc. it is the ideal pressing shaping equipments with low investment and high profit.
Models of production:
model
Capacity(t/h)
Power(kw)
Pellet specification(mm)
Weight(t)
Size(mm)
XGJ550
0.8-1.2
75
4-12
6.04
2630×100×2400
XGJ560
1-1.5
90
4-12
6.1
2600×1300×2300
XGJ580
1.5-2.5
160
4-12
7
2900×1300×2400
XGJ850
2.5-3.5
220
4-12
14.5
3800×1400×3100
XGJ880
3-5
315
4-12
18
3800×1680×3400
XGJ580
pellet machine:
1.sawdust,straw,stalk pellets
2.fertilizer and feed pellets
3.diameter from 2-15mm
4.CE certicified
pellet machine
The equipment is applied to the materials with low adhesiveness and low shaping, such as the rice husk, sunflower seed husk, peanut shell and other fruit shell; branch ,trunk, bark and other wood waste; a variety of corp straws, rubber, cement, ash and other chemical materials.
This type of pellet mill is widely used in the biomass-energy fuels plant, power plant, wood processing plant, fertilizer plant, chemical plant etc.
The series pellet mill absorbs the quintessence at home and abroad, the heart part adopts
“
double-layer die” as the unique structure; The rollers are made by abrasion-proof alloy steel ,improving the using life of spare parts greatly; For the drive parts, the grease is filtrated automatically lubricated properly.
Special design, rational structure, lower power consumption, high efficiency, sturdy and durable, supplying the gap of vertical feeding of ring-die pellet mill at home, reach the international advanced level.
1.sawdust,straw,stalk pellets
2.fertilizer and feed pellets
3.diameter from 2-15mm
4.CE certicified
pellet machine
The equipment is applied to the materials with low adhesiveness and low shaping, such as the rice husk, sunflower seed husk, peanut shell and other fruit shell; branch ,trunk, bark and other wood waste; a variety of corp straws, rubber, cement, ash and other chemical materials.
This type of pellet mill is widely used in the biomass-energy fuels plant, power plant, wood processing plant, fertilizer plant, chemical plant etc.
The series pellet mill absorbs the quintessence at home and abroad, the heart part adopts
“
double-layer die” as the unique structure; The rollers are made by abrasion-proof alloy steel ,improving the using life of spare parts greatly; For the drive parts, the grease is filtrated automatically lubricated properly.
Special design, rational structure, lower power consumption, high efficiency, sturdy and durable, supplying the gap of vertical feeding of ring-die pellet mill at home, reach the international advanced level.
Biomass fuel
biofuel
100% all nature
Buring Longer Buring Stonger Less Ash to Clean
20 Years manufacture Experence
Fast Delivery
Biofuel Extruder Briquette Charcoal Wood Pellet Suppier From qingdao China .
100% all nature
Buring Longer Buring Stonger Less Ash to Clean
20 Years manufacture Experence
Fast Delivery
Biofuel Extruder Briquette Charcoal Wood Pellet Suppier From qingdao China .
XGJ850 sawdust pellet mill
pellet mill
1. CE approved.
2. Patent products.
3.Vertical die,feeding vertically.
4. Independent Iubrication.
sawdust pellet mill
XGJ series efficient centrifugal pellet mill is our initiative patented products in China through meticulous research and development.
The series pellet mill absorbs the quintessence at home and abroad, the heart part adopts
“
double-layer die” as the unique structure; The rollers are made by abrasion-proof alloy steel ,improving the using life of spare parts greatly; For the drive parts, the grease is filtrated automatically lubricated properly.
Special design, rational structure, lower power consumption, high efficiency, sturdy and durable, supplying the gap of vertical feeding of ring-die pellet mill at home, reach the international advanced level.
The equipment is applied to the materials with low adhesiveness and low shaping, such as the rice husk, sunflower seed husk, peanut shell and other fruit shell; branch ,trunk, bark and other wood waste; a variety of corp straws, rubber, cement, ash and other chemical materials.
This type of pellet mill is widely used in the biomass-energy fuels plant, power plant, wood processing plant, fertilizer plant, chemical plant etc.
It is the ideal pressing shaping equipment with low investment and high profit.
1. CE approved.
2. Patent products.
3.Vertical die,feeding vertically.
4. Independent Iubrication.
sawdust pellet mill
XGJ series efficient centrifugal pellet mill is our initiative patented products in China through meticulous research and development.
The series pellet mill absorbs the quintessence at home and abroad, the heart part adopts
“
double-layer die” as the unique structure; The rollers are made by abrasion-proof alloy steel ,improving the using life of spare parts greatly; For the drive parts, the grease is filtrated automatically lubricated properly.
Special design, rational structure, lower power consumption, high efficiency, sturdy and durable, supplying the gap of vertical feeding of ring-die pellet mill at home, reach the international advanced level.
The equipment is applied to the materials with low adhesiveness and low shaping, such as the rice husk, sunflower seed husk, peanut shell and other fruit shell; branch ,trunk, bark and other wood waste; a variety of corp straws, rubber, cement, ash and other chemical materials.
This type of pellet mill is widely used in the biomass-energy fuels plant, power plant, wood processing plant, fertilizer plant, chemical plant etc.
It is the ideal pressing shaping equipment with low investment and high profit.
YULONG brand PX disc wood chipper
CE disc wood chipper
wood chipper for wood branch, round logs,wood chips,wood waste
power:45kw output:2-4T
10-30mm wood chips
the CE approved PX disc wood chipper
the wood chippers with two types:PX disc wood chippe and GX drum wood chipper.They are all CE SGS ISO9000 approved national patent products.
the structure of the
disc wood chipper/wood shredder:
wood chips mill has two doors on top, and it is manuelly inputting wood logs from one feed door, smashed wood pieces will outlet from another chipper door.
the operation of the disc wood chipper/wood shreder:
the wood chipping machine is mainly used to chip big wood logs into wood pieces, the thickness of last pieces is
1.5mm-3mm,longth and width is 10-30mm
.
the application of the disc wood chipper/wood shreder:
the wood shredder is widely used in the raw material preparing process in the factories of flakeboard,fiberboard,papermaking and wood chips making plants. As for the output of the wood shredder, its better
fit for small factory or home using ,low cost and easily repaire.
the technical parameter of the disc wood chipper/wood chips mill:
Model
PX15-80
PX45-190
Rotate knives(pcs)
3
3
Feeder size(mm)
150×150
180×180
Power(kw)
18-22
45
Capacity(t/h)
1-2t
2-4T
Chips size
10-30
10-30
the following pictures are the pictures of PX disc and GX drum wood chiper:
wood chipper for wood branch, round logs,wood chips,wood waste
power:45kw output:2-4T
10-30mm wood chips
the CE approved PX disc wood chipper
the wood chippers with two types:PX disc wood chippe and GX drum wood chipper.They are all CE SGS ISO9000 approved national patent products.
the structure of the
disc wood chipper/wood shredder:
wood chips mill has two doors on top, and it is manuelly inputting wood logs from one feed door, smashed wood pieces will outlet from another chipper door.
the operation of the disc wood chipper/wood shreder:
the wood chipping machine is mainly used to chip big wood logs into wood pieces, the thickness of last pieces is
1.5mm-3mm,longth and width is 10-30mm
.
the application of the disc wood chipper/wood shreder:
the wood shredder is widely used in the raw material preparing process in the factories of flakeboard,fiberboard,papermaking and wood chips making plants. As for the output of the wood shredder, its better
fit for small factory or home using ,low cost and easily repaire.
the technical parameter of the disc wood chipper/wood chips mill:
Model
PX15-80
PX45-190
Rotate knives(pcs)
3
3
Feeder size(mm)
150×150
180×180
Power(kw)
18-22
45
Capacity(t/h)
1-2t
2-4T
Chips size
10-30
10-30
the following pictures are the pictures of PX disc and GX drum wood chiper:
YULONG brand PX disc wood chipper
CE disc wood chipper
wood chipper for wood branch, round logs,wood chips,wood waste
power:45kw output:2-4T
10-30mm wood chips
the CE approved PX disc wood chipper
the wood chippers with two types:PX disc wood chippe and GX drum wood chipper.They are all CE SGS ISO9000 approved national patent products.
the structure of the
disc wood chipper/wood shredder:
wood chips mill has two doors on top, and it is manuelly inputting wood logs from one feed door, smashed wood pieces will outlet from another chipper door.
the operation of the disc wood chipper/wood shreder:
the wood chipping machine is mainly used to chip big wood logs into wood pieces, the thickness of last pieces is
1.5mm-3mm,longth and width is 10-30mm
.
the application of the disc wood chipper/wood shreder:
the wood shredder is widely used in the raw material preparing process in the factories of flakeboard,fiberboard,papermaking and wood chips making plants. As for the output of the wood shredder, its better
fit for small factory or home using ,low cost and easily repaire.
the technical parameter of the disc wood chipper/wood chips mill:
Model
PX15-80
PX45-190
Rotate knives(pcs)
3
3
Feeder size(mm)
150×150
180×180
Power(kw)
18-22
45
Capacity(t/h)
1-2t
2-4T
Chips size
10-30
10-30
the following pictures are the pictures of PX disc and GX drum wood chiper:
wood chipper for wood branch, round logs,wood chips,wood waste
power:45kw output:2-4T
10-30mm wood chips
the CE approved PX disc wood chipper
the wood chippers with two types:PX disc wood chippe and GX drum wood chipper.They are all CE SGS ISO9000 approved national patent products.
the structure of the
disc wood chipper/wood shredder:
wood chips mill has two doors on top, and it is manuelly inputting wood logs from one feed door, smashed wood pieces will outlet from another chipper door.
the operation of the disc wood chipper/wood shreder:
the wood chipping machine is mainly used to chip big wood logs into wood pieces, the thickness of last pieces is
1.5mm-3mm,longth and width is 10-30mm
.
the application of the disc wood chipper/wood shreder:
the wood shredder is widely used in the raw material preparing process in the factories of flakeboard,fiberboard,papermaking and wood chips making plants. As for the output of the wood shredder, its better
fit for small factory or home using ,low cost and easily repaire.
the technical parameter of the disc wood chipper/wood chips mill:
Model
PX15-80
PX45-190
Rotate knives(pcs)
3
3
Feeder size(mm)
150×150
180×180
Power(kw)
18-22
45
Capacity(t/h)
1-2t
2-4T
Chips size
10-30
10-30
the following pictures are the pictures of PX disc and GX drum wood chiper:
Your best choice Sawdust Briquette Press Machine
Sawdust Briquette Press Machine
is widely used for making briquettes of different shape and size from sawdust,straw,etc.
Sawdust Briquette Press Machine
Usage:
1)
Sawdust Briquette Press Machine
can be used to make coal dust or sawdust into oval shape, pillow shape etc;
2) It also can be used to make different kinds of briquettes from mineral powder, such as coal powder, coke powder, charcoal powder, iron dust, mill scale, cast iron powder, etc;
3) The briquettes made by the machine is widely used in daily life, for example: heating,cooking,BBQ,etc.
Advantages:
1)
Sawdust Briquette Press Machine
uses unique hydraulic system, improving the briquetting rate and strength.
2) It is suitable for many materials such as light burning magnesium, iron oxide skin, manganese alloy, sludge, gypsum, carbon, silicon carbide, copper powder, iron powder and various refractory materials.
Main specifications:
Model
400
Capacity
1 H
6T/H
1 Y
20000T
Roll diameter (mm)
400
Roll width(mm)
280
Power(kw)
11--15
Press form
Mechanical / hydraulic
Structure form
2 roll single pressure / 4 roll double pressure
Pressure(T)
25--35
Dimensions (mm)
1400*1150*2150
Finished Briquettes:
is widely used for making briquettes of different shape and size from sawdust,straw,etc.
Sawdust Briquette Press Machine
Usage:
1)
Sawdust Briquette Press Machine
can be used to make coal dust or sawdust into oval shape, pillow shape etc;
2) It also can be used to make different kinds of briquettes from mineral powder, such as coal powder, coke powder, charcoal powder, iron dust, mill scale, cast iron powder, etc;
3) The briquettes made by the machine is widely used in daily life, for example: heating,cooking,BBQ,etc.
Advantages:
1)
Sawdust Briquette Press Machine
uses unique hydraulic system, improving the briquetting rate and strength.
2) It is suitable for many materials such as light burning magnesium, iron oxide skin, manganese alloy, sludge, gypsum, carbon, silicon carbide, copper powder, iron powder and various refractory materials.
Main specifications:
Model
400
Capacity
1 H
6T/H
1 Y
20000T
Roll diameter (mm)
400
Roll width(mm)
280
Power(kw)
11--15
Press form
Mechanical / hydraulic
Structure form
2 roll single pressure / 4 roll double pressure
Pressure(T)
25--35
Dimensions (mm)
1400*1150*2150
Finished Briquettes:
Your best choice:Bean Husk ,bamboo briquette machine
Your best choice:Bean Husk ,bamboo briquette machine
1. High quality and efficiency
2. Long Service
3.Durable briquette Ma
Your best choice:Bean Husk ,bamboo briquette machine
I Introduction:
Briquettes are made by grinding Biomass and sawdust into a homogeneous pulp and forming this into a briquette under very high pressure. High pressure & pressing releases one of the natural components of wood - lignin which has the property of becoming liquid at high pressure (temperature) and, as it subsequently cools, it binds the wood together in its new form Briquettes.
2. raw material could be :
Any types of Agro-forestry waste and forest waste can be used for make briquettes Such as maize stalks, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo sawdust, bagasse , wood chips, rice husk, coffee husk, coir pith, jute sticks, groundnut shells, Bamboo, wood, straw dust, Mustard stalk and cotton stalks ,nutshell, coconut shell ,etc
3.Features:
Charcoal briquette machine shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. Charcoal briquette machine can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-90mm
.
3.Applications
Such series are mainly used to extrude steel cutting, cast iron filing, copper scrap and aluminum scrap into high density cylinder bulk, in order to achieve convenient reclamation and easy refining ,especially, the extruded casting iron filing may substitute foundry iron.
Model
Capacity
Power (kw)
Dimensions,
mm
Bar Diameter, mm
Weight, MT
ZBJ9-1
180-220kg/h
11kw /20HP
1750*1250*680
45,50,55
0.5
ZBJ9-2
250-320kg/h
15KW/25HP
1750*1250*680
60,70,80
0.6
ZBJ9-3
320-400kg/h
22kw /30HP
1950*1350*950
80
0.95
ZBJ9-4
1000-1200kg/h
15*5+3+3+0.5
6000*2350*5000
50.60.65.70
3.8
ZBJ9-5
1500-2000kg/h
15*10+3*2+3+1
6000*3350*5000
50,60,70,80
7.5
I am so happy to have your inquiry. Pls Contact me asap.
1. High quality and efficiency
2. Long Service
3.Durable briquette Ma
Your best choice:Bean Husk ,bamboo briquette machine
I Introduction:
Briquettes are made by grinding Biomass and sawdust into a homogeneous pulp and forming this into a briquette under very high pressure. High pressure & pressing releases one of the natural components of wood - lignin which has the property of becoming liquid at high pressure (temperature) and, as it subsequently cools, it binds the wood together in its new form Briquettes.
2. raw material could be :
Any types of Agro-forestry waste and forest waste can be used for make briquettes Such as maize stalks, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo sawdust, bagasse , wood chips, rice husk, coffee husk, coir pith, jute sticks, groundnut shells, Bamboo, wood, straw dust, Mustard stalk and cotton stalks ,nutshell, coconut shell ,etc
3.Features:
Charcoal briquette machine shows the features of high capacity, low energy consumption, compact and durable. Many performance data such as capacity, wood briquettes density, electricity consumption and wearable degree has reached advanced level. Charcoal briquette machine can be used as charcoal powder briquette machine by replacement of some spare parts. The out diameter of finished briquettes is 40-90mm
.
3.Applications
Such series are mainly used to extrude steel cutting, cast iron filing, copper scrap and aluminum scrap into high density cylinder bulk, in order to achieve convenient reclamation and easy refining ,especially, the extruded casting iron filing may substitute foundry iron.
Model
Capacity
Power (kw)
Dimensions,
mm
Bar Diameter, mm
Weight, MT
ZBJ9-1
180-220kg/h
11kw /20HP
1750*1250*680
45,50,55
0.5
ZBJ9-2
250-320kg/h
15KW/25HP
1750*1250*680
60,70,80
0.6
ZBJ9-3
320-400kg/h
22kw /30HP
1950*1350*950
80
0.95
ZBJ9-4
1000-1200kg/h
15*5+3+3+0.5
6000*2350*5000
50.60.65.70
3.8
ZBJ9-5
1500-2000kg/h
15*10+3*2+3+1
6000*3350*5000
50,60,70,80
7.5
I am so happy to have your inquiry. Pls Contact me asap.
ZLMP Series Pellet Mill
1.easy to use
2.good pellets shape
3.better service
4.CE motor
5.price:USD 600-6000
Anyang Gemco Energy Machinery Co.,LTD is commit itself to supply high quality machines to satisfy customers all over the world. With the fast development of feeding animals industry and biomass energy saving project, ZLMP series wood pelletizing machine become very popular. Since they not only can process the feedstuff for animals, such as feed for fish, chicken, pig etc, but also can process the waste biomass material to wood pellet. The final wood pellet can be burned as green fuel in pellet stove or boiler. We carry diesel,single phase and 3 electric and PTO driven models as well as mill heads. We got the
CE certificate to meet EU client's requirement, so you can use it safely.
It made up with motor, hopper, upper box, middle box, lower box, etc. the following are the pictures
ZLMP 260B Finished pellets
The technical data is
Model
Power
Capacity
Dimension(mm)
Weight(Net/Gross)
ZLMP120B
2.2-3KW
40-80Kg/h
710*390*910
80/100Kg
ZLMP150B
4KW
50-90Kg/h
750*350*650
90-120Kg
ZLMP200B
7.5 KW
80-120 Kg/h
1000*430*950
200/230 Kg
ZLMP230B
11 KW
150-300 Kg/h
1140*470*970
290/320 Kg
ZLMP260B
15 KW
200-450 Kg/h
1200*500*1070
330/360 Kg
ZLMP300B
22 KW
300-600 Kg/h
1220*600*1000
410/450 Kg
ZLMP360B
22 KW
470-500 Kg/h
1220*600*1000
470/500 Kg
ZLMP400B
30 KW
400-800 Kg/h
1320*600*1050
550/585 Kg
Advices for you
1) Best moisture is 15% for all materials
2) The temperature is about 90-95°C, you have to take over the pellet just coming out from this pellet press and cooling it before touching it by hand.
2.good pellets shape
3.better service
4.CE motor
5.price:USD 600-6000
Anyang Gemco Energy Machinery Co.,LTD is commit itself to supply high quality machines to satisfy customers all over the world. With the fast development of feeding animals industry and biomass energy saving project, ZLMP series wood pelletizing machine become very popular. Since they not only can process the feedstuff for animals, such as feed for fish, chicken, pig etc, but also can process the waste biomass material to wood pellet. The final wood pellet can be burned as green fuel in pellet stove or boiler. We carry diesel,single phase and 3 electric and PTO driven models as well as mill heads. We got the
CE certificate to meet EU client's requirement, so you can use it safely.
It made up with motor, hopper, upper box, middle box, lower box, etc. the following are the pictures
ZLMP 260B Finished pellets
The technical data is
Model
Power
Capacity
Dimension(mm)
Weight(Net/Gross)
ZLMP120B
2.2-3KW
40-80Kg/h
710*390*910
80/100Kg
ZLMP150B
4KW
50-90Kg/h
750*350*650
90-120Kg
ZLMP200B
7.5 KW
80-120 Kg/h
1000*430*950
200/230 Kg
ZLMP230B
11 KW
150-300 Kg/h
1140*470*970
290/320 Kg
ZLMP260B
15 KW
200-450 Kg/h
1200*500*1070
330/360 Kg
ZLMP300B
22 KW
300-600 Kg/h
1220*600*1000
410/450 Kg
ZLMP360B
22 KW
470-500 Kg/h
1220*600*1000
470/500 Kg
ZLMP400B
30 KW
400-800 Kg/h
1320*600*1050
550/585 Kg
Advices for you
1) Best moisture is 15% for all materials
2) The temperature is about 90-95°C, you have to take over the pellet just coming out from this pellet press and cooling it before touching it by hand.
ZLMP-200 Wood/Feed Pellet Mill
Wood/Feed Pellet Mill
1.good quality
2.high output pellets
3.with prime brand parts
4. ce iso9001
Wood/Feed Pellet Mill
1.good quality
2.high output pellets
3.with prime brand parts
4. ce iso9001
Pelletizing is the process of making waste materials into solid fuel. The objects are used for burning purposes. Pellet Mill is one of the most commonly used pelletizing materials. Pellet Mill can be made from any type of Agro-Forestry waste: Groundnut-shell, Sugarcane Biogases, Caster Shells/Stalk, Saw dust, Coffee Husk, Paddy Straw, Sunflower Stalk, Cotton Stalks, Tobacco waste, Mustard Stalk, Jute waste, Bamboo Dust, Tea waste, Wheat Straw, Palm husk, Soybeans husk, Coir Pitch Barks/Straws, Rice Husks, Forestry wastes, Wood Chips and many other Agro wastes.
Model
Power(kw)
Capacity(kg/hr)
ZLMP200B
7.5
80-120
ZLSP200B
7.5
200-300
For using this flat die pellet mill, we got some feedback from our customers. They obtained some experience when they were using this machine to produce wood pellet. Hope it is helpful for you:
1) Best moisture is 15% for all materials
2) The temperature is constant about 90-95'C, you have to take over the pellet just coming out from this pellet press and cooling it before touching it by hand.
Furthermore, we improved our flat dies pelleting press more suitable to produce wood pellet after absorbing
& digesting the feedback from our customers. In general, they're:
1) Special raw material on the main parts such as roller, template, matrix
Prolonging the life than other similar products in China when process wood pellet after this modification.
2) Modify the whole in the matrix to improve performance of the machines. It's more easy to making pellet.
3) We got the
CE Certificate
to meet EU client's requirement.
4) Pellet Mill PTO: A power take-off (PTO) is a splined driveshaft, usually on a tractor or truck, that can be used to provide power to an attachment or separate machine. Our pellet mill PTO is designed to be easily connected and disconnected. The power take-off (PTO) allows implements to draw energy from the tractor's engine
(1) (2) (3)
(1).Pellet Mill Dies & Rollers
(2).Burning Wood Pellet Fuel
(3).Finished Pellets
Anyang GEMCO Energy Machinery
Co.,Ltd is one of the leading Chinese Wood Granulator companies,who design and manufacture of Flat Die Pellet Mill / Flat Die Pelleting
Presses.
1.good quality
2.high output pellets
3.with prime brand parts
4. ce iso9001
Wood/Feed Pellet Mill
1.good quality
2.high output pellets
3.with prime brand parts
4. ce iso9001
Pelletizing is the process of making waste materials into solid fuel. The objects are used for burning purposes. Pellet Mill is one of the most commonly used pelletizing materials. Pellet Mill can be made from any type of Agro-Forestry waste: Groundnut-shell, Sugarcane Biogases, Caster Shells/Stalk, Saw dust, Coffee Husk, Paddy Straw, Sunflower Stalk, Cotton Stalks, Tobacco waste, Mustard Stalk, Jute waste, Bamboo Dust, Tea waste, Wheat Straw, Palm husk, Soybeans husk, Coir Pitch Barks/Straws, Rice Husks, Forestry wastes, Wood Chips and many other Agro wastes.
Model
Power(kw)
Capacity(kg/hr)
ZLMP200B
7.5
80-120
ZLSP200B
7.5
200-300
For using this flat die pellet mill, we got some feedback from our customers. They obtained some experience when they were using this machine to produce wood pellet. Hope it is helpful for you:
1) Best moisture is 15% for all materials
2) The temperature is constant about 90-95'C, you have to take over the pellet just coming out from this pellet press and cooling it before touching it by hand.
Furthermore, we improved our flat dies pelleting press more suitable to produce wood pellet after absorbing
& digesting the feedback from our customers. In general, they're:
1) Special raw material on the main parts such as roller, template, matrix
Prolonging the life than other similar products in China when process wood pellet after this modification.
2) Modify the whole in the matrix to improve performance of the machines. It's more easy to making pellet.
3) We got the
CE Certificate
to meet EU client's requirement.
4) Pellet Mill PTO: A power take-off (PTO) is a splined driveshaft, usually on a tractor or truck, that can be used to provide power to an attachment or separate machine. Our pellet mill PTO is designed to be easily connected and disconnected. The power take-off (PTO) allows implements to draw energy from the tractor's engine
(1) (2) (3)
(1).Pellet Mill Dies & Rollers
(2).Burning Wood Pellet Fuel
(3).Finished Pellets
Anyang GEMCO Energy Machinery
Co.,Ltd is one of the leading Chinese Wood Granulator companies,who design and manufacture of Flat Die Pellet Mill / Flat Die Pelleting
Presses.
agri pellet straw briquette
high heating value low ash residual
We offer Superior Quality Straw Pellets/Briquette
We produce all-natural Jiffy Straw Pellets are made of 100% biodegradable sphagnum straw moss and wood pulp. Pellets expand when watered, creating a natural seedling pot made of straw. The pellets also contain a minor fertilizer charge plus lime to balance the acidity of straw moss. 25/pk.
Straw pellets combine the strengths of aricultural mass and pellets. They have a high calorific value, supplies are reliable, and, like fuel peat, prices are stable.
Bio-mass straw pellets are produced from milled straws, which is dried before pelletization.
Pellet fuel 30-60mm
Calorific value 16-18 MJ/kg
Moisture content < 14 %
Ash < 4 %
Packing polypropylene sacks 30 kg
Contact us if you are interested in any supply.
We offer Superior Quality Straw Pellets/Briquette
We produce all-natural Jiffy Straw Pellets are made of 100% biodegradable sphagnum straw moss and wood pulp. Pellets expand when watered, creating a natural seedling pot made of straw. The pellets also contain a minor fertilizer charge plus lime to balance the acidity of straw moss. 25/pk.
Straw pellets combine the strengths of aricultural mass and pellets. They have a high calorific value, supplies are reliable, and, like fuel peat, prices are stable.
Bio-mass straw pellets are produced from milled straws, which is dried before pelletization.
Pellet fuel 30-60mm
Calorific value 16-18 MJ/kg
Moisture content < 14 %
Ash < 4 %
Packing polypropylene sacks 30 kg
Contact us if you are interested in any supply.
agripellets/ straw briquette
high buning value, low ash residule
We offer Superior Quality Straw Pellets/Briquette
We produce all-natural Jiffy Straw Pellets are made of 100% biodegradable sphagnum straw moss and wood pulp. Pellets expand when watered, creating a natural seedling pot made of straw. The pellets also contain a minor fertilizer charge plus lime to balance the acidity of straw moss. 25/pk.
Straw pellets combine the strengths of aricultural mass and pellets. They have a high calorific value, supplies are reliable, and, like fuel peat, prices are stable.
Bio-mass straw pellets are produced from milled straws, which is dried before pelletization.
Pellet fuel 30-60mm
Calorific value 16-18 MJ/kg
Moisture content < 14 %
Ash < 4 %
Packing polypropylene sacks 30 kg
Contact us if you are interested in any supply.
We offer Superior Quality Straw Pellets/Briquette
We produce all-natural Jiffy Straw Pellets are made of 100% biodegradable sphagnum straw moss and wood pulp. Pellets expand when watered, creating a natural seedling pot made of straw. The pellets also contain a minor fertilizer charge plus lime to balance the acidity of straw moss. 25/pk.
Straw pellets combine the strengths of aricultural mass and pellets. They have a high calorific value, supplies are reliable, and, like fuel peat, prices are stable.
Bio-mass straw pellets are produced from milled straws, which is dried before pelletization.
Pellet fuel 30-60mm
Calorific value 16-18 MJ/kg
Moisture content < 14 %
Ash < 4 %
Packing polypropylene sacks 30 kg
Contact us if you are interested in any supply.
arrowrootflour granulator
1:high efficient
2:meeting IOS9001 standard
3:it is made up of stainless steel
4:reasonable price
Features:
It consists of an extrusion head and a pelletizing mechanism which are arranged on the same plane so as provides more compact structure and easier operation. When palletizing, the mixture of medicine powder raw material and adhesives such as cellulose, wetting adhesive and so on is put into the hopper of the extrusion head. The extruded strips are transferred into the palletizing process; and then the pellets can be coated. By changing of net head, granule of different diameter can be manufactured.
Technical data:
Model
QZJ-350
QZJ-500
Capacity(kg/h)
2-20
5-40
Size of input granule(mm)
0.5-5
Turntable diameter(mm)
350
500
Turntable speed(r/min)
200-600
150-500
General power(kw)
1.5
3
Weight(kg)
232
350
Overall size(L*W*H)(mm)
1850*880*1320
1500*800*1500
2:meeting IOS9001 standard
3:it is made up of stainless steel
4:reasonable price
Features:
It consists of an extrusion head and a pelletizing mechanism which are arranged on the same plane so as provides more compact structure and easier operation. When palletizing, the mixture of medicine powder raw material and adhesives such as cellulose, wetting adhesive and so on is put into the hopper of the extrusion head. The extruded strips are transferred into the palletizing process; and then the pellets can be coated. By changing of net head, granule of different diameter can be manufactured.
Technical data:
Model
QZJ-350
QZJ-500
Capacity(kg/h)
2-20
5-40
Size of input granule(mm)
0.5-5
Turntable diameter(mm)
350
500
Turntable speed(r/min)
200-600
150-500
General power(kw)
1.5
3
Weight(kg)
232
350
Overall size(L*W*H)(mm)
1850*880*1320
1500*800*1500
1-26T/1H Complete Wood Pellet Producing Line
1)1-26T/1H Complete Wood Pellet Producing Line
2)Pelletizing the waste materials into solid fuel for Pellet Stove
3)With CE
1)Model Name:1-26T/1H Complete Wood Pellet Producing Line
Wood Pellet Line/Plant & Wood Pelleting Line/Plant & Wood Pelletizing Line/Plant & Complete Biomass Pelleting Plant/Line & Complete Biomass Pellet Plant/Line & Complete Biomass Pelletizing Plant/Line & Wood Pellet Manufacturing Line/Plant & Wood Pellet Making Line/Plant & Saw Dust Pelletizing Plant/Line & Saw Dust Pelleting Plant/Line
2)Usage:
It is the process of making waste materials into solid fuel. The objects are used for burning purposes. Biomass Pellet can be made from any type of Agro-Forestry waste:
Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
1. Crushing Process:
Depending on the different input material, we fit out the suitable Crushing machines. The BX-Series Combined Chipping and Crushing Machine is used for the Log with diameter <200mm; SFSP-series Hammer Mill is widely used to crush each kind of straw, wood chip, tree branch, bark and leftover bits from agricultural wastes. The best moisture content in the Crushing Process is less 20%, and the thickness of the wood chip is less 5mm.
2. Drying Process:
The best moisture content to pelletizing is about 14-16%. Our new combined Rotary Drum Dryer is made up of Burning Stove and Main Rotary Dryer, which can realize to reduce the moisture from 50% to 10%, and save about 30% energy consumption comparing the old Rotary Dryer. Our burning stove is fueled by coal, wood material, or LPG, diesel which can save electricity consumption largely.
3. Pelletizing Process:
MZLH Biomass Pellet Mill is the most important equipment, which has the following features:
(1).
The lubrication system for Biomass pellet mill adopts the tracing and inspecting system controlled by the microcomputer. When the temperature of the bearing is over the normal temperature, the microcomputer will start the circle closed Auto-Lubrication System to lubricate the bearings, which complete solved the trouble of lubricating roller depending on the operation experience. The Lubrication System is made up of the tracing and inspecting system controlled by the microcomputer, auto-lubricating system on time and compelled lubricating system by hand.
(2).
Driving Gear adopts the high precision gear transmission structure. The wear bearing is made from China Biggest Bearing Manufacturer according to our special requests. The ring die adopts the hoop fastening method, which is increasing the speed of discharge comparing with the past bolt fastening method. As a result, the capacity is 10-15% higher than the belt transmission structure.
(3).
As per the ring die and roller of the biomass pellet mill, we have the fine machining with the alloyed steel, such as 20 CrMnTi and 40Cr; and stainless steel, such as 4 Cr13 and 3 Cr13. And our heating treatment is also different from the other domestic manufacturer, our carburizing treatment make the depth of hard facing to 2mm, which improve the anti-abrasion of the ring die and roller more than 10 times, it can save the production cost heavily.
4. Cooling Process:
After the pelletizing process, the temperature of the biomass pellet is about 60-80 degree, and the moisture content of the biomass pellet is about 15%, so we need use Cooler to reduce about 3-4% moisture, such this the biomass pellet is easy to store.
But considering the feedback from some foreign clients, the local climate is very wet; they hope to cool the biomass pellet with moisture 7-8%. In order to satisfy the different need from different clients, we develop one kind of new Stabilizer Combined Cooler and Belt Cooler.
5. Packing Process:
After cooling, the biomass pellet will not directly enter into the fuel process, avoiding the biomass pellet affected with damp. The packing process is necessary. In this process, we assemble our domestic best Semi-Auto Packing Machine to you.
2)Pelletizing the waste materials into solid fuel for Pellet Stove
3)With CE
1)Model Name:1-26T/1H Complete Wood Pellet Producing Line
Wood Pellet Line/Plant & Wood Pelleting Line/Plant & Wood Pelletizing Line/Plant & Complete Biomass Pelleting Plant/Line & Complete Biomass Pellet Plant/Line & Complete Biomass Pelletizing Plant/Line & Wood Pellet Manufacturing Line/Plant & Wood Pellet Making Line/Plant & Saw Dust Pelletizing Plant/Line & Saw Dust Pelleting Plant/Line
2)Usage:
It is the process of making waste materials into solid fuel. The objects are used for burning purposes. Biomass Pellet can be made from any type of Agro-Forestry waste:
Groundnut-shell Sugarcane Biogases Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Coir Pitch Barks/Straws Rice Husks Forestry wastes Wood Chips and many other Agro wastes.
1. Crushing Process:
Depending on the different input material, we fit out the suitable Crushing machines. The BX-Series Combined Chipping and Crushing Machine is used for the Log with diameter <200mm; SFSP-series Hammer Mill is widely used to crush each kind of straw, wood chip, tree branch, bark and leftover bits from agricultural wastes. The best moisture content in the Crushing Process is less 20%, and the thickness of the wood chip is less 5mm.
2. Drying Process:
The best moisture content to pelletizing is about 14-16%. Our new combined Rotary Drum Dryer is made up of Burning Stove and Main Rotary Dryer, which can realize to reduce the moisture from 50% to 10%, and save about 30% energy consumption comparing the old Rotary Dryer. Our burning stove is fueled by coal, wood material, or LPG, diesel which can save electricity consumption largely.
3. Pelletizing Process:
MZLH Biomass Pellet Mill is the most important equipment, which has the following features:
(1).
The lubrication system for Biomass pellet mill adopts the tracing and inspecting system controlled by the microcomputer. When the temperature of the bearing is over the normal temperature, the microcomputer will start the circle closed Auto-Lubrication System to lubricate the bearings, which complete solved the trouble of lubricating roller depending on the operation experience. The Lubrication System is made up of the tracing and inspecting system controlled by the microcomputer, auto-lubricating system on time and compelled lubricating system by hand.
(2).
Driving Gear adopts the high precision gear transmission structure. The wear bearing is made from China Biggest Bearing Manufacturer according to our special requests. The ring die adopts the hoop fastening method, which is increasing the speed of discharge comparing with the past bolt fastening method. As a result, the capacity is 10-15% higher than the belt transmission structure.
(3).
As per the ring die and roller of the biomass pellet mill, we have the fine machining with the alloyed steel, such as 20 CrMnTi and 40Cr; and stainless steel, such as 4 Cr13 and 3 Cr13. And our heating treatment is also different from the other domestic manufacturer, our carburizing treatment make the depth of hard facing to 2mm, which improve the anti-abrasion of the ring die and roller more than 10 times, it can save the production cost heavily.
4. Cooling Process:
After the pelletizing process, the temperature of the biomass pellet is about 60-80 degree, and the moisture content of the biomass pellet is about 15%, so we need use Cooler to reduce about 3-4% moisture, such this the biomass pellet is easy to store.
But considering the feedback from some foreign clients, the local climate is very wet; they hope to cool the biomass pellet with moisture 7-8%. In order to satisfy the different need from different clients, we develop one kind of new Stabilizer Combined Cooler and Belt Cooler.
5. Packing Process:
After cooling, the biomass pellet will not directly enter into the fuel process, avoiding the biomass pellet affected with damp. The packing process is necessary. In this process, we assemble our domestic best Semi-Auto Packing Machine to you.
Biomass pellet fuel
Biomass Pellet Fuel
Biomass Pellet Fuel suit for heating system.
Biomass Pellet Fuel use 100% Wood Chip/Sawdust
Biomass pellets fuel is higher density biological grain fuel.
Wood pellet
renewable and less harm to our environment.It doesn't add more carbon dioxide.
Wood pellet is an important source of energy worldwide after coal,oil and natural gas.
Specifications:
Material: 100% wood chip/sawdust
Diameter: 6~8mm
Length: 30~60mm
Moisture: <7%
Ash Content: 1~2%
Calorie: 4200~4800kcal/kg
Density: 1050~1250kg/m3
Package: 25kg/PP woven bag or 50kg/PP woven bag.w
Biomass Pellet Fuel suit for heating system.
Biomass Pellet Fuel use 100% Wood Chip/Sawdust
Biomass pellets fuel is higher density biological grain fuel.
Wood pellet
renewable and less harm to our environment.It doesn't add more carbon dioxide.
Wood pellet is an important source of energy worldwide after coal,oil and natural gas.
Specifications:
Material: 100% wood chip/sawdust
Diameter: 6~8mm
Length: 30~60mm
Moisture: <7%
Ash Content: 1~2%
Calorie: 4200~4800kcal/kg
Density: 1050~1250kg/m3
Package: 25kg/PP woven bag or 50kg/PP woven bag.w
bbq charcoal(6h/8500kcal/10kg/carton)
bbq charcoal(6h/8500kcal/10kg/carton)
1..smokeless,odourless,
2.8000kcal
3.6 to 6.5h
4.5% ash
bbq charcoal(6h/8500kcal/10kg/carton)
Smokeless,odourless,innocuity,with black prismatical structure,long burning time
Specifications:
Items
Value
Charcoal content
>92%
Moisture
5
Heating Value
8000kcal
Volatile Matter
3%
Ash
5%
Compression Strength
1.0Mpa
Resistivity
3-5Ω
Characteristics:
1.Smokeless,odourless,innocuity
2.No additive charcoal briquette
3.Produce a hot,long-lasting,virtually smokeless fire
4.Popularly used for outside cooking.BBQ Charcoal
1..smokeless,odourless,
2.8000kcal
3.6 to 6.5h
4.5% ash
bbq charcoal(6h/8500kcal/10kg/carton)
Smokeless,odourless,innocuity,with black prismatical structure,long burning time
Specifications:
Items
Value
Charcoal content
>92%
Moisture
5
Heating Value
8000kcal
Volatile Matter
3%
Ash
5%
Compression Strength
1.0Mpa
Resistivity
3-5Ω
Characteristics:
1.Smokeless,odourless,innocuity
2.No additive charcoal briquette
3.Produce a hot,long-lasting,virtually smokeless fire
4.Popularly used for outside cooking.BBQ Charcoal
bearing
Jiangsu Energy Renewable Resources Co.,Ltd is specialized in developing and manufacturing straw renewable energy. Our company es
Jiangsu Energy Renewable Resources Co.,Ltd is specialized in developing and manufacturing straw renewable energy. Our company established in May of 2009, with the registered capital of 1000 thousand, have more than 150 employees and 10 Professional technical persons. Our factory covers an area of 30,000 square meters, with a total produce capacity of 100,000 tons annually and about 1000 sets of machine to produce straw briquette fuel. Now we have an investment about 1100 million, meanwhile we have established a production line which could make 10 thousand tons of draw bio-energy.
Jiangsu Energy Renewable Resources Co.,Ltd is specialized in developing and manufacturing straw renewable energy. Our company established in May of 2009, with the registered capital of 1000 thousand, have more than 150 employees and 10 Professional technical persons. Our factory covers an area of 30,000 square meters, with a total produce capacity of 100,000 tons annually and about 1000 sets of machine to produce straw briquette fuel. Now we have an investment about 1100 million, meanwhile we have established a production line which could make 10 thousand tons of draw bio-energy.
bearings
Jiangsu Energy Renewable Resources Co.,Ltd is specialized in developing and manufacturing straw renewable energy. Our company es
Jiangsu Energy Renewable Resources Co.,Ltd is specialized in developing and manufacturing straw renewable energy. Our company established in May of 2009, with the registered capital of 1000 thousand, have more than 150 employees and 10 Professional technical persons. Our factory covers an area of 30,000 square meters, with a total produce capacity of 100,000 tons annually and about 1000 sets of machine to produce straw briquette fuel. Now we have an investment about 1100 million, meanwhile we have established a production line which could make 10 thousand tons of draw bio-energy.
Jiangsu Energy Renewable Resources Co.,Ltd is specialized in developing and manufacturing straw renewable energy. Our company established in May of 2009, with the registered capital of 1000 thousand, have more than 150 employees and 10 Professional technical persons. Our factory covers an area of 30,000 square meters, with a total produce capacity of 100,000 tons annually and about 1000 sets of machine to produce straw briquette fuel. Now we have an investment about 1100 million, meanwhile we have established a production line which could make 10 thousand tons of draw bio-energy.
best wood pellets
Best wood pellets for Fuel
High caloric value
Little ash, no additives
Competive Price
Green Energy
BEST WOOD PELLETS FOR FUEL !!!
Cost Stability Comparison
Wood pellets ' market is expand quickly.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels.
SPECIFICATION:
Origin
China
Package
15kg/bag
and bulk
Certification
SGS
Availability
2000M/T
Caloric value
>4600
kcal
MOQ
1 Container
(25tons)
Ash content
<0.59%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T, L/C
Diameter
6mm
Delivery time
Within One month
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
IT SALES HOT! THE PRICE AND THE QUALITY WILL NOT LET YOUR DOWN!!!
High caloric value
Little ash, no additives
Competive Price
Green Energy
BEST WOOD PELLETS FOR FUEL !!!
Cost Stability Comparison
Wood pellets ' market is expand quickly.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels.
SPECIFICATION:
Origin
China
Package
15kg/bag
and bulk
Certification
SGS
Availability
2000M/T
Caloric value
>4600
kcal
MOQ
1 Container
(25tons)
Ash content
<0.59%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T, L/C
Diameter
6mm
Delivery time
Within One month
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
IT SALES HOT! THE PRICE AND THE QUALITY WILL NOT LET YOUR DOWN!!!
big pack pellets
Big pack pellets
High heat output
Low ash
Certification SGS
Earth friendly
BIG PACK PELLETS !
What are wood pellets?
Wood pellets are a type of wood fuel, generally made from compacted sawdust.
They are usually produced as a byproduct of sawmilling and other wood transformation activities.
The pellets are extremely dense and can be produced with a low humidity content (below 10%)
that allows them to be burned with a very high combustion efficiency.
SPECIFICATION:
Origin
China
Package
50kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4200
kcal
MOQ
2 Container
(50tons)
Ash content
<1.75%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
Diameter
8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
Our stringent quality standards apply to every pellet in every bag.
We produces wood pellets from a special blend of hardwood and softwood.
Our pellets are 100% natural wood with no additives or chemical binders
and very low ash content. They burn evenly and provide long lasting consistent.
SUPPLY TO WHOLE SELLERS AND RETAILERS!
IF YOU ARE INTERESTED IN A PARTNERSHIP
DO NOT HESITATE TO CONTACT ME!
High heat output
Low ash
Certification SGS
Earth friendly
BIG PACK PELLETS !
What are wood pellets?
Wood pellets are a type of wood fuel, generally made from compacted sawdust.
They are usually produced as a byproduct of sawmilling and other wood transformation activities.
The pellets are extremely dense and can be produced with a low humidity content (below 10%)
that allows them to be burned with a very high combustion efficiency.
SPECIFICATION:
Origin
China
Package
50kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4200
kcal
MOQ
2 Container
(50tons)
Ash content
<1.75%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
Diameter
8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
Our stringent quality standards apply to every pellet in every bag.
We produces wood pellets from a special blend of hardwood and softwood.
Our pellets are 100% natural wood with no additives or chemical binders
and very low ash content. They burn evenly and provide long lasting consistent.
SUPPLY TO WHOLE SELLERS AND RETAILERS!
IF YOU ARE INTERESTED IN A PARTNERSHIP
DO NOT HESITATE TO CONTACT ME!
biological Fuel
biofuel rod is made from sawdust and wood chips
no harmful smell and smokeless
biofuel can be used in many field
enviromental
Biological Fuel
Biofuel is produced with sawdust and wood chips, which are dried and disinfected. Biological fuel is non-toxic and odorless, is a enviromental protectction product. It is usually used in smelting, generating electricity and heating.
Calorific value: 4200-5500cal
4% ash can be used as fertilizer
Our company is a leading manufactuer of charcoal products in China. We have good reputation on product quality.
So if you want to know much more information about charcoal products, please don't hesitate to contact me!
no harmful smell and smokeless
biofuel can be used in many field
enviromental
Biological Fuel
Biofuel is produced with sawdust and wood chips, which are dried and disinfected. Biological fuel is non-toxic and odorless, is a enviromental protectction product. It is usually used in smelting, generating electricity and heating.
Calorific value: 4200-5500cal
4% ash can be used as fertilizer
Our company is a leading manufactuer of charcoal products in China. We have good reputation on product quality.
So if you want to know much more information about charcoal products, please don't hesitate to contact me!
biomass briquette fuel
biomass briquette fuel
High calorific value
Resistance to burn
No pollution
Green products
biomass
briquette fuel
High calorific value
Resistance to burn
No pollution
Green products
biomass
briquette fuel
biomass briquette machine
1 patent machine
2 high capacity
3 continue working longtime
4 CE motor
Wood pellet mill is a new patent of pellet mill special for wood sawdust. But it can also apply to the stalk, straw, and son on. It is adopted the technology from Europe. The output volume is high, energy consumption is low and the operation is convenient.
A) The materials are pressed by the 3 rollers at one time, so the pressed area increases 1 more roller, so the output is improved.
B) The three rollers are designed fan-shaped and slanted to reduce the friction between the roller and the plate. Therefore the consumption is lower.
Model
Output(kg/h)
Power(kw)
Processing standards(mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
2-15
0.18
1150×380×800
Diesel engine and motor dual-use
SKJ2-250
160-260
15
0.48
1260×600×800
SKJ2-300
300-500
30
0.79
1550×650×1000
SKJ3-350
400-600
37
1.6
1800×850×1500
Gear rotation
SKJ3-450
500-800
55
2.3
2300×1100×1600
SKJ3-550A
1000-2000
90
3.2
2600×1100×2100
SKJ200B
100-300
11
Briquette diameter:6-25
Press size:
20×30
0.13
1170×420×850
SKJ3-350B
200-500
30
2
1850×600×1650
SKJ3-450B
400-700
37
3
1850×900×1200
SKJ3-550B
600-1000
55
2.8
2600×1100×1850
SKJ3-800
2000-3000
130-160
7.6
2700×1200×2400
SKJ4-1200
3000-4000
280-320
16.5
3700×1900×3000
2 high capacity
3 continue working longtime
4 CE motor
Wood pellet mill is a new patent of pellet mill special for wood sawdust. But it can also apply to the stalk, straw, and son on. It is adopted the technology from Europe. The output volume is high, energy consumption is low and the operation is convenient.
A) The materials are pressed by the 3 rollers at one time, so the pressed area increases 1 more roller, so the output is improved.
B) The three rollers are designed fan-shaped and slanted to reduce the friction between the roller and the plate. Therefore the consumption is lower.
Model
Output(kg/h)
Power(kw)
Processing standards(mm)
Weight(t)
Size(mm)
Note
SKJ2-200
100-160
11
2-15
0.18
1150×380×800
Diesel engine and motor dual-use
SKJ2-250
160-260
15
0.48
1260×600×800
SKJ2-300
300-500
30
0.79
1550×650×1000
SKJ3-350
400-600
37
1.6
1800×850×1500
Gear rotation
SKJ3-450
500-800
55
2.3
2300×1100×1600
SKJ3-550A
1000-2000
90
3.2
2600×1100×2100
SKJ200B
100-300
11
Briquette diameter:6-25
Press size:
20×30
0.13
1170×420×850
SKJ3-350B
200-500
30
2
1850×600×1650
SKJ3-450B
400-700
37
3
1850×900×1200
SKJ3-550B
600-1000
55
2.8
2600×1100×1850
SKJ3-800
2000-3000
130-160
7.6
2700×1200×2400
SKJ4-1200
3000-4000
280-320
16.5
3700×1900×3000
Friday, October 14, 2011
biomass fuel pellet mill
1.XKj series can make the biomass fule pellet
2.High producing
3.low production temperature
4.Low electricity cost
1.XKj series wood pellet mill can make the biomass fule pellet
2.High producing ,
3.low production temperature.
4.Low electricity cost.
XKJ series of flat die pellet mill is on the basis of the circular motion of machinery, motor driven, driving gear delivered to spindle and dies, the friction of the roller's rotation so that pressing wheel and die between very high temperature, powdery friction materials through high-temperature viscosity, protein and lipid solidification degeneration in the roller's extrusion hole from die extrusion, then by a rejection of a wheel is made of particles by outlet sent out.
XKJ320-
Motor: Y-200L6 22 kW, speed 970 r
Flat die diameter: 320 mm
Flat die speed: 300r/min
Die hole size:
Ø
2-
Ø
20
Granule moisture content: the original item is less than 10%
2.High producing
3.low production temperature
4.Low electricity cost
1.XKj series wood pellet mill can make the biomass fule pellet
2.High producing ,
3.low production temperature.
4.Low electricity cost.
XKJ series of flat die pellet mill is on the basis of the circular motion of machinery, motor driven, driving gear delivered to spindle and dies, the friction of the roller's rotation so that pressing wheel and die between very high temperature, powdery friction materials through high-temperature viscosity, protein and lipid solidification degeneration in the roller's extrusion hole from die extrusion, then by a rejection of a wheel is made of particles by outlet sent out.
XKJ320-
Motor: Y-200L6 22 kW, speed 970 r
Flat die diameter: 320 mm
Flat die speed: 300r/min
Die hole size:
Ø
2-
Ø
20
Granule moisture content: the original item is less than 10%
Biomass pellet fuel
Biomass Pellet Fuel
Biomass Pellet Fuel suit for heating system.
Biomass Pellet Fuel use 100% Wood Chip/Sawdust
Biomass pellets fuel is higher density biological grain fuel.
Wood pellet
renewable and less harm to our environment.It doesn't add more carbon dioxide.
Wood pellet is an important source of energy worldwide after coal,oil and natural gas.
Specifications:
Material: 100% wood chip/sawdust
Diameter: 6~8mm
Length: 30~60mm
Moisture: <7%
Ash Content: 1~2%
Calorie: 4200~4800kcal/kg
Density: 1050~1250kg/m3
Package: 25kg/PP woven bag or 50kg/PP woven bag.w
Biomass Pellet Fuel suit for heating system.
Biomass Pellet Fuel use 100% Wood Chip/Sawdust
Biomass pellets fuel is higher density biological grain fuel.
Wood pellet
renewable and less harm to our environment.It doesn't add more carbon dioxide.
Wood pellet is an important source of energy worldwide after coal,oil and natural gas.
Specifications:
Material: 100% wood chip/sawdust
Diameter: 6~8mm
Length: 30~60mm
Moisture: <7%
Ash Content: 1~2%
Calorie: 4200~4800kcal/kg
Density: 1050~1250kg/m3
Package: 25kg/PP woven bag or 50kg/PP woven bag.w
biomass pellet machinery(rice husk, wood, stalk, coconut shell, plants)
biomass pellet machinery:
reasonable design
good quality
competitive price
be delivered in a short time...
pellet machinery:
The PM serial equipment for fodder processing, are indispensable for scientific feeding by making the fullest use of natural resources. It is especially applicable to the masters of pellet fuel, fodder-process factory and individual specialization to process the fodder.
It processes the powder material, small pellet to be standard granular fodder characterized with good rigidity, perfect smoothness, long shelf life and suitable rate of moisture.
Pellet mill can process all kinds of sawdust, paddy straw, sunflower, forestry wastes, wood chip, chemical and many other wastes for various feedstuff for live stock, poultry and aquatic products, grass meal, organic fertilizer,etc. It is used to pellet the mixed feedstuff powder within one time. The product can be stored for a long time. It mainly applies to aquaculture, fish, ducks, chicken,shrimp, pigs,cattle, sheep, as well as industrial processing particles.
Pellet machinery
Name
Model
Power
(kw)
Output
(kg/h)
Net/GrossWeight
(kg)
dimension
Pellet mill
PM200
7.5
200-300
200/230
100*43*95cm
Pellet mill
PM230
11
300-400kg/h
290/320
114*47*97cm
Pellet mill
PM260
15
400-600kg/h
330/380
120*50*107cm
Pellet mill
PM300
22
700-800kg/h
410/450
127*52*107cm
Pellet mill
PM360
22kw
800-900kg/h
470/500
127*52*107vm
Pellet mill
PM400
30kw
900-1100kg/h
630/660
147*60*115cm
reasonable design
good quality
competitive price
be delivered in a short time...
pellet machinery:
The PM serial equipment for fodder processing, are indispensable for scientific feeding by making the fullest use of natural resources. It is especially applicable to the masters of pellet fuel, fodder-process factory and individual specialization to process the fodder.
It processes the powder material, small pellet to be standard granular fodder characterized with good rigidity, perfect smoothness, long shelf life and suitable rate of moisture.
Pellet mill can process all kinds of sawdust, paddy straw, sunflower, forestry wastes, wood chip, chemical and many other wastes for various feedstuff for live stock, poultry and aquatic products, grass meal, organic fertilizer,etc. It is used to pellet the mixed feedstuff powder within one time. The product can be stored for a long time. It mainly applies to aquaculture, fish, ducks, chicken,shrimp, pigs,cattle, sheep, as well as industrial processing particles.
Pellet machinery
Name
Model
Power
(kw)
Output
(kg/h)
Net/GrossWeight
(kg)
dimension
Pellet mill
PM200
7.5
200-300
200/230
100*43*95cm
Pellet mill
PM230
11
300-400kg/h
290/320
114*47*97cm
Pellet mill
PM260
15
400-600kg/h
330/380
120*50*107cm
Pellet mill
PM300
22
700-800kg/h
410/450
127*52*107cm
Pellet mill
PM360
22kw
800-900kg/h
470/500
127*52*107vm
Pellet mill
PM400
30kw
900-1100kg/h
630/660
147*60*115cm
biomass pellet
biomass pellet
100% all nature
Buring longer and stonger ,less ash to clean
Envirmen friendly products
Fast Delivery
biomass pellet
1.Sawdust is the mainly raw materials
2.It's clean and hygiene during burning process
3.A new type of fuel is high energy and envirmental protection
100% all nature
Buring longer and stonger ,less ash to clean
Envirmen friendly products
Fast Delivery
biomass pellet
1.Sawdust is the mainly raw materials
2.It's clean and hygiene during burning process
3.A new type of fuel is high energy and envirmental protection
biomass pellet
Biomass Pellet With Quality
High BTU'S
Competitive Price
Certification SGS
Green Energy
BIOMASS PELLET WITH QUALITY!!!
SPECIFICATION:
Origin
China
Package
50kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4400
kcal
MOQ
1 Container
(25tons)
Ash content
<1.6%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
Diameter
8mm
Delivery time
one week
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
In addition, wood pellets:
• are convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
• have a high energy content, and the technology is highly efficient compared to other
biomass fuels
• are a clean-burning renewable fuel source
• are produced from such waste materials as forestry residues and sawdust
• are price stable compared to fossil fuels
SUPPLY TO WHOLE SELLERS AND RETAILERS!
IF YOU ARE INTERESTED IN A PARTNERSHIP DO NOT HESITATE
TO CONTACT ME!
High BTU'S
Competitive Price
Certification SGS
Green Energy
BIOMASS PELLET WITH QUALITY!!!
SPECIFICATION:
Origin
China
Package
50kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4400
kcal
MOQ
1 Container
(25tons)
Ash content
<1.6%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
Diameter
8mm
Delivery time
one week
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
In addition, wood pellets:
• are convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
• have a high energy content, and the technology is highly efficient compared to other
biomass fuels
• are a clean-burning renewable fuel source
• are produced from such waste materials as forestry residues and sawdust
• are price stable compared to fossil fuels
SUPPLY TO WHOLE SELLERS AND RETAILERS!
IF YOU ARE INTERESTED IN A PARTNERSHIP DO NOT HESITATE
TO CONTACT ME!
biomass pellet
-Wood Pellets for Sale
-Low-Ash
-High BTU'S
-Service
-SGS-DIN
Specifications
-Wood Pellets for Sale
-Low-Ash
-High BTU'S
-Service
-SGS-DIN
We sell wood pellets , SGS DIN certified, with the following characteristics:
PELLETS:
Ash content:<0.5% ,<0.7% or <1.15%
Diameter: 6~8mm
Caloric value: >4600cal/kg
Sulphur content: 0.03%
Density: 1.2-1.3 kg/m3
Length: 10-30mm
-Low-Ash
-High BTU'S
-Service
-SGS-DIN
Specifications
-Wood Pellets for Sale
-Low-Ash
-High BTU'S
-Service
-SGS-DIN
We sell wood pellets , SGS DIN certified, with the following characteristics:
PELLETS:
Ash content:<0.5% ,<0.7% or <1.15%
Diameter: 6~8mm
Caloric value: >4600cal/kg
Sulphur content: 0.03%
Density: 1.2-1.3 kg/m3
Length: 10-30mm
biomass pellets extruder
biomass pellets extruder
1.Usage: for heating
2.delivery the goods on time
3. we are the producer
4. Top 20 enterprise
biomass pellets extruder
1.Usage: for heating
2.delivery the goods on time
3. we are the producer
4. Top 20 enterprise
we are the main supplier in China
we are stayed in GongYi City, ZhengZhou city, HeNan Province . China
Welcome to visit our country. If possible, we will pick up you in XinZheng Airport
1.Usage: for heating
2.delivery the goods on time
3. we are the producer
4. Top 20 enterprise
biomass pellets extruder
1.Usage: for heating
2.delivery the goods on time
3. we are the producer
4. Top 20 enterprise
we are the main supplier in China
we are stayed in GongYi City, ZhengZhou city, HeNan Province . China
Welcome to visit our country. If possible, we will pick up you in XinZheng Airport
biomass pellets extruders
biomass pellets extruders
1.Usage: for heating
2.delivery the goods on time
3. we are the producer
4. Top 20 enterprise
biomass pellets extruders
1.Usage: for heating
2.delivery the goods on time
3. we are the producer
4. Top 20 enterprise
we are the main supplier in China
we are stayed in GongYi City, ZhengZhou city, HeNan Province . China
Welcome to visit our country. If possible, we will pick up you in XinZheng Airport
1.Usage: for heating
2.delivery the goods on time
3. we are the producer
4. Top 20 enterprise
biomass pellets extruders
1.Usage: for heating
2.delivery the goods on time
3. we are the producer
4. Top 20 enterprise
we are the main supplier in China
we are stayed in GongYi City, ZhengZhou city, HeNan Province . China
Welcome to visit our country. If possible, we will pick up you in XinZheng Airport
biomass pellets mill capacity: 1ton/h
biomass pellets mill
1.Less volume to store
2.Easy to transport
3. Versatile
4. Lesser emission and
biomass pellets millIssue
# 1: Environmental – Friendly?
Wood pellets are said to be a type of fuel that is a carbon neutralizer. The carbon dioxide that is released during the combustion is taken by the growing trees and plants during the essential process of photosynthesis. Therefore, they do not worsen global warming. They are said to emit lesser hazardous gases and ashes which could bring harm to the environment. Moreover, by utilization of wood pellets, which are basically wastes, they would not create another problem on waste management.
However, an issue concerning deforestation which is not at all environmental friendly arises. The fact is wood pellets come from logs/woods which are cut down trees. With increasing demand for wood pellets, there might be an increasing need to cut down trees which could include those that are domicile to many animals and plants.
Issue # 2: Sustainable?
Wood pellets are derived from woods/logs that are basically renewable, therefore wood pellet fuels can be considered as a sustainable source of energy. As long as the balance between the supply and demand for trees exists and maintained, then it would not give rise to a major problem like scarcity. However, an issue about their sustainability is still being questioned. Is it really possible to maintain such balance? Deforestation has been reported in few areas. When trees are cut down without replacing them, eventually scarcity would be the consequence.
Issue # 3: Cost – effective?
It is still a question whether using wood pellet fuels is cheaper than utilizing the conventional ones. Though any nation can lessen its reliance to foreign oils/fuels by using its own resources, it does not change the fact that pellet use is a new innovation that require some complicated and different equipment/machineries that could be more expensive. In fact some models of wood pellet heating systems are quite expensive too.
1.Less volume to store
2.Easy to transport
3. Versatile
4. Lesser emission and
biomass pellets millIssue
# 1: Environmental – Friendly?
Wood pellets are said to be a type of fuel that is a carbon neutralizer. The carbon dioxide that is released during the combustion is taken by the growing trees and plants during the essential process of photosynthesis. Therefore, they do not worsen global warming. They are said to emit lesser hazardous gases and ashes which could bring harm to the environment. Moreover, by utilization of wood pellets, which are basically wastes, they would not create another problem on waste management.
However, an issue concerning deforestation which is not at all environmental friendly arises. The fact is wood pellets come from logs/woods which are cut down trees. With increasing demand for wood pellets, there might be an increasing need to cut down trees which could include those that are domicile to many animals and plants.
Issue # 2: Sustainable?
Wood pellets are derived from woods/logs that are basically renewable, therefore wood pellet fuels can be considered as a sustainable source of energy. As long as the balance between the supply and demand for trees exists and maintained, then it would not give rise to a major problem like scarcity. However, an issue about their sustainability is still being questioned. Is it really possible to maintain such balance? Deforestation has been reported in few areas. When trees are cut down without replacing them, eventually scarcity would be the consequence.
Issue # 3: Cost – effective?
It is still a question whether using wood pellet fuels is cheaper than utilizing the conventional ones. Though any nation can lessen its reliance to foreign oils/fuels by using its own resources, it does not change the fact that pellet use is a new innovation that require some complicated and different equipment/machineries that could be more expensive. In fact some models of wood pellet heating systems are quite expensive too.
biomass pellets mill
biomass pellets mill
1.Less volume to store
2.Easy to transport
3. Versatile
4. Lesser emission and
biomass pellets mill
Issue # 1: Environmental – Friendly?
Wood pellets are said to be a type of fuel that is a carbon neutralizer. The carbon dioxide that is released during the combustion is taken by the growing trees and plants during the essential process of photosynthesis. Therefore, they do not worsen global warming. They are said to emit lesser hazardous gases and ashes which could bring harm to the environment. Moreover, by utilization of wood pellets, which are basically wastes, they would not create another problem on waste management.
However, an issue concerning deforestation which is not at all environmental friendly arises. The fact is wood pellets come from logs/woods which are cut down trees. With increasing demand for wood pellets, there might be an increasing need to cut down trees which could include those that are domicile to many animals and plants.
Issue # 2: Sustainable?
Wood pellets are derived from woods/logs that are basically renewable, therefore wood pellet fuels can be considered as a sustainable source of energy. As long as the balance between the supply and demand for trees exists and maintained, then it would not give rise to a major problem like scarcity. However, an issue about their sustainability is still being questioned. Is it really possible to maintain such balance? Deforestation has been reported in few areas. When trees are cut down without replacing them, eventually scarcity would be the consequence.
Issue # 3: Cost – effective?
It is still a question whether using wood pellet fuels is cheaper than utilizing the conventional ones. Though any nation can lessen its reliance to foreign oils/fuels by using its own resources, it does not change the fact that pellet use is a new innovation that require some complicated and different equipment/machineries that could be more expensive. In fact some models of wood pellet heating systems are quite expensive too.
Issue # 4: Convenient?
Another important issue is that: Is it really convenient and simple to use? Yes, they maybe convenient to store, deliver or transfer because of their solid distinct properties. However, the fact still remains that these are alternatives and non conventional. They are operated quite differently from the usual traditional fuel heating systems. In reality, pellet stoves have unique controls that might be unfamiliar for most of the home users. Also, once you are used to traditional heating systems, it would be a great adjustment for you once you shift to pellet heating appliances as they contain some complex components that might bring confusion to the consumers.
Issue # 5: Versatile?
It has been claimed that some conventional models of heating systems can actually allow the use of wood pellets, it is still recommended to utilize wood pellets in heating systems specifically designed for pellets.
1.Less volume to store
2.Easy to transport
3. Versatile
4. Lesser emission and
biomass pellets mill
Issue # 1: Environmental – Friendly?
Wood pellets are said to be a type of fuel that is a carbon neutralizer. The carbon dioxide that is released during the combustion is taken by the growing trees and plants during the essential process of photosynthesis. Therefore, they do not worsen global warming. They are said to emit lesser hazardous gases and ashes which could bring harm to the environment. Moreover, by utilization of wood pellets, which are basically wastes, they would not create another problem on waste management.
However, an issue concerning deforestation which is not at all environmental friendly arises. The fact is wood pellets come from logs/woods which are cut down trees. With increasing demand for wood pellets, there might be an increasing need to cut down trees which could include those that are domicile to many animals and plants.
Issue # 2: Sustainable?
Wood pellets are derived from woods/logs that are basically renewable, therefore wood pellet fuels can be considered as a sustainable source of energy. As long as the balance between the supply and demand for trees exists and maintained, then it would not give rise to a major problem like scarcity. However, an issue about their sustainability is still being questioned. Is it really possible to maintain such balance? Deforestation has been reported in few areas. When trees are cut down without replacing them, eventually scarcity would be the consequence.
Issue # 3: Cost – effective?
It is still a question whether using wood pellet fuels is cheaper than utilizing the conventional ones. Though any nation can lessen its reliance to foreign oils/fuels by using its own resources, it does not change the fact that pellet use is a new innovation that require some complicated and different equipment/machineries that could be more expensive. In fact some models of wood pellet heating systems are quite expensive too.
Issue # 4: Convenient?
Another important issue is that: Is it really convenient and simple to use? Yes, they maybe convenient to store, deliver or transfer because of their solid distinct properties. However, the fact still remains that these are alternatives and non conventional. They are operated quite differently from the usual traditional fuel heating systems. In reality, pellet stoves have unique controls that might be unfamiliar for most of the home users. Also, once you are used to traditional heating systems, it would be a great adjustment for you once you shift to pellet heating appliances as they contain some complex components that might bring confusion to the consumers.
Issue # 5: Versatile?
It has been claimed that some conventional models of heating systems can actually allow the use of wood pellets, it is still recommended to utilize wood pellets in heating systems specifically designed for pellets.
biomass stove
biomass stove
sepcifical for coal,pellet,wood,straw,etc.
smokeless,no tar,1.5kg firewood can last 1-2hour
Main Features and its Performance:
The machine uses biomass as fuel and is free of smoke and tar, while burning effectively. It is characterized by its strong and adjustable flame, low emission, and high thermal effectiveness and can be lighted directly and fast without using electricity.
It is of thermal insulation, which improves its combustion performance to make the most of the heat. It is pollution-free, so using it helps to improve the ecologic environment, and indoor air quality,which does good to people’s health. It is designed to have an elegant appearance and is of fire-resistance, of oxidation resistance and firm, so it can be
used for a very long time. Besides, it is so small and light that it can be moved easily. Because of those features, it is really user-friendly and easy to be maintained.
Design
1. Our stoves are elaborately designed and of elegant appearance. They quite fit for rural use for a large furnace plate that can be used as table.
2. The secondary air inlet is designed in proportion with the size of the hearth by aero hydromechanics theory to control the intake of air. The flame swirls towards the center of the furnace under the influence of aero hydromechanics, thus it becomes strong and the mixing air can be burned sufficiently so as to meet smoke dust emissions standards.
3. The design of secondary air inlet increases the thermal efficiency by more than 10%.
4. Easy-open feeder decreases the work strength. If you want to do more cooking, you can open the cover easily and add burning material,which avoids smoke pollution compared with traditional ways of burning.
5. Our stoves are of proper structure, of excellent air tightness, free of smoke, environmentally friendly and healthful, thus they can decrease disease rate.
6. Users can see the burning through the peer hole.
7. The furnace core is made of fire-proof material to prolong its use life.
8. There is a handle on the stove. Ashes can be got out easily by pushing and pulling the handle only.
9. There is a chock. Flame force can be adjusted by it accordingly.
10. The ash holder is big, avoiding frequent cleanup of ash.
Manufacturing
Our stoves are made of brand-new steel of excellent quality, and the jerry-buildings are strictly forbidden.
2.All spare parts are made by ourselves, which gives a strong assurance to the quality.
3.We use the gas shielded welding which can make sure the joints are smooth and firm.
4. The car spray of craft of the lacquer that bake reaches on the face plate of furnace, bring brand-new visual sense to enjoy for kitchen life undoubtedly.
sepcifical for coal,pellet,wood,straw,etc.
smokeless,no tar,1.5kg firewood can last 1-2hour
Main Features and its Performance:
The machine uses biomass as fuel and is free of smoke and tar, while burning effectively. It is characterized by its strong and adjustable flame, low emission, and high thermal effectiveness and can be lighted directly and fast without using electricity.
It is of thermal insulation, which improves its combustion performance to make the most of the heat. It is pollution-free, so using it helps to improve the ecologic environment, and indoor air quality,which does good to people’s health. It is designed to have an elegant appearance and is of fire-resistance, of oxidation resistance and firm, so it can be
used for a very long time. Besides, it is so small and light that it can be moved easily. Because of those features, it is really user-friendly and easy to be maintained.
Design
1. Our stoves are elaborately designed and of elegant appearance. They quite fit for rural use for a large furnace plate that can be used as table.
2. The secondary air inlet is designed in proportion with the size of the hearth by aero hydromechanics theory to control the intake of air. The flame swirls towards the center of the furnace under the influence of aero hydromechanics, thus it becomes strong and the mixing air can be burned sufficiently so as to meet smoke dust emissions standards.
3. The design of secondary air inlet increases the thermal efficiency by more than 10%.
4. Easy-open feeder decreases the work strength. If you want to do more cooking, you can open the cover easily and add burning material,which avoids smoke pollution compared with traditional ways of burning.
5. Our stoves are of proper structure, of excellent air tightness, free of smoke, environmentally friendly and healthful, thus they can decrease disease rate.
6. Users can see the burning through the peer hole.
7. The furnace core is made of fire-proof material to prolong its use life.
8. There is a handle on the stove. Ashes can be got out easily by pushing and pulling the handle only.
9. There is a chock. Flame force can be adjusted by it accordingly.
10. The ash holder is big, avoiding frequent cleanup of ash.
Manufacturing
Our stoves are made of brand-new steel of excellent quality, and the jerry-buildings are strictly forbidden.
2.All spare parts are made by ourselves, which gives a strong assurance to the quality.
3.We use the gas shielded welding which can make sure the joints are smooth and firm.
4. The car spray of craft of the lacquer that bake reaches on the face plate of furnace, bring brand-new visual sense to enjoy for kitchen life undoubtedly.
biomass straw pellet briquette
high buning value, low ash residule
We offer Superior Quality Straw Pellets/Briquette
We produce all-natural Jiffy Straw Pellets are made of 100% biodegradable sphagnum straw moss and wood pulp. Pellets expand when watered, creating a natural seedling pot made of straw. The pellets also contain a minor fertilizer charge plus lime to balance the acidity of straw moss. 25/pk.
Straw pellets combine the strengths of aricultural mass and pellets. They have a high calorific value, supplies are reliable, and, like fuel peat, prices are stable.
Bio-mass straw pellets are produced from milled straws, which is dried before pelletization.
Pellet fuel 30-60mm
Calorific value 16-18 MJ/kg
Moisture content < 14 %
Ash < 4 %
Packing polypropylene sacks 30 kg
Contact us if you are interested in any supply.
We offer Superior Quality Straw Pellets/Briquette
We produce all-natural Jiffy Straw Pellets are made of 100% biodegradable sphagnum straw moss and wood pulp. Pellets expand when watered, creating a natural seedling pot made of straw. The pellets also contain a minor fertilizer charge plus lime to balance the acidity of straw moss. 25/pk.
Straw pellets combine the strengths of aricultural mass and pellets. They have a high calorific value, supplies are reliable, and, like fuel peat, prices are stable.
Bio-mass straw pellets are produced from milled straws, which is dried before pelletization.
Pellet fuel 30-60mm
Calorific value 16-18 MJ/kg
Moisture content < 14 %
Ash < 4 %
Packing polypropylene sacks 30 kg
Contact us if you are interested in any supply.
Biomass pellet fuel
Biomass Pellet Fuel
Biomass Pellet Fuel suit for heating system.
Biomass Pellet Fuel use 100% Wood Chip/Sawdust
Biomass pellets fuel is higher density biological grain fuel.
Wood pellet
renewable and less harm to our environment.It doesn't add more carbon dioxide.
Wood pellet is an important source of energy worldwide after coal,oil and natural gas.
Specifications:
Material: 100% wood chip/sawdust
Diameter: 6~8mm
Length: 30~60mm
Moisture: <7%
Ash Content: 1~2%
Calorie: 4200~4800kcal/kg
Density: 1050~1250kg/m3
Package: 25kg/PP woven bag or 50kg/PP woven bag.w
Biomass Pellet Fuel suit for heating system.
Biomass Pellet Fuel use 100% Wood Chip/Sawdust
Biomass pellets fuel is higher density biological grain fuel.
Wood pellet
renewable and less harm to our environment.It doesn't add more carbon dioxide.
Wood pellet is an important source of energy worldwide after coal,oil and natural gas.
Specifications:
Material: 100% wood chip/sawdust
Diameter: 6~8mm
Length: 30~60mm
Moisture: <7%
Ash Content: 1~2%
Calorie: 4200~4800kcal/kg
Density: 1050~1250kg/m3
Package: 25kg/PP woven bag or 50kg/PP woven bag.w
biomass wood pellet fuel /6mm wood pellet for sale
biomass wood pellet fuel
1.Diameter: 6MM 8MM
2.Length: 10-30MM
3.Moisture: <8%
4.Calorie: 4200-4800KCAL/KG
wood pellet Specification:
Size: 6 to 8mm diameter, 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4300 ~ 4800kcal/kg
Density: 1100 ~1300kg/m3
Packing: PP bag
High Heating Value Pellets
Non Toxic Fumes
ZERO Additives
100% Natural
1.Diameter: 6MM 8MM
2.Length: 10-30MM
3.Moisture: <8%
4.Calorie: 4200-4800KCAL/KG
wood pellet Specification:
Size: 6 to 8mm diameter, 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4300 ~ 4800kcal/kg
Density: 1100 ~1300kg/m3
Packing: PP bag
High Heating Value Pellets
Non Toxic Fumes
ZERO Additives
100% Natural
biomass wood pellet fuel /6mm wood pellet for sale
biomass wood pellet fuel
1.Diameter: 6MM 8MM
2.Length: 10-30MM
3.Moisture: <8%
4.Calorie: 4200-4800KCAL/KG
Excellent Wood Pellet Standard
Ash amount: less than 0.75%
Moisture: less than 10%
Diameter: 6 mm-8mm
Length: 10mm-30mm
Made from pure pine wood , no bark
Bright, uniform surface color
No horizontal or vertical cracks
Density1100-1300kg/M3
calorific value :4300-4800kcal/kg
Uniform size: quality in production
Clear in water cup test
Non Toxic Fumes
Zero Additive
1.Diameter: 6MM 8MM
2.Length: 10-30MM
3.Moisture: <8%
4.Calorie: 4200-4800KCAL/KG
Excellent Wood Pellet Standard
Ash amount: less than 0.75%
Moisture: less than 10%
Diameter: 6 mm-8mm
Length: 10mm-30mm
Made from pure pine wood , no bark
Bright, uniform surface color
No horizontal or vertical cracks
Density1100-1300kg/M3
calorific value :4300-4800kcal/kg
Uniform size: quality in production
Clear in water cup test
Non Toxic Fumes
Zero Additive
biomass wood pellet fuel
biomass wood pellet
100% all nature
buring longer buring stonger
less ash to clean
envirment frindly high heating value
wood pellet Specification:
Size: 6 to 8mm diameter, 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4300 ~ 4800kcal/kg
Density: 1100 ~1300kg/m3
Packing: PP bag
Price: USD 170 /ton, FOB Qingdao ,China. This is for wood pellet price
High Heating Value Pellets
Non Toxic Fumes
ZERO Additives
100% Natural
100% all nature
buring longer buring stonger
less ash to clean
envirment frindly high heating value
wood pellet Specification:
Size: 6 to 8mm diameter, 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4300 ~ 4800kcal/kg
Density: 1100 ~1300kg/m3
Packing: PP bag
Price: USD 170 /ton, FOB Qingdao ,China. This is for wood pellet price
High Heating Value Pellets
Non Toxic Fumes
ZERO Additives
100% Natural
biomass wood pellet
Biological Granulated Fuel
clean and hygiene
high energy and envirmental protection
biomass wood pellet
1.Sawdust is the mainly raw materials
2.It's clean and hygiene during burning process
3.A new type of fuel is high energy and envirmental protection
clean and hygiene
high energy and envirmental protection
biomass wood pellet
1.Sawdust is the mainly raw materials
2.It's clean and hygiene during burning process
3.A new type of fuel is high energy and envirmental protection
biomass wood pellet
biomass wood pellet
100% all nature
high heatting value
buring stonger buring longer less ash to clean
fast delivery
biomass wood pellet main technical parameter
Size: 6 mm 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4200 ~ 4500kcal/kg
Density: 1100 ~1300kg/m3
Size: 6 mm 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4200 ~ 4500kcal/kg
Density: 1100 ~1300kg/m3
100% all nature
high heatting value
buring stonger buring longer less ash to clean
fast delivery
biomass wood pellet main technical parameter
Size: 6 mm 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4200 ~ 4500kcal/kg
Density: 1100 ~1300kg/m3
Size: 6 mm 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4200 ~ 4500kcal/kg
Density: 1100 ~1300kg/m3
biomass wood pellet
biomass wood pellet
100% all nature
4200-4500kcal heatting value
1100-1300kg/m3 density
buring longer buring stonger
biomass wood pellet main technical parameter
Size: 6 mm 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4200 ~ 4500kcal/kg
Density: 1100 ~1300kg/m3
Size: 6 mm 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4200 ~ 4500kcal/kg
Density: 1100 ~1300kg/m3
100% all nature
4200-4500kcal heatting value
1100-1300kg/m3 density
buring longer buring stonger
biomass wood pellet main technical parameter
Size: 6 mm 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4200 ~ 4500kcal/kg
Density: 1100 ~1300kg/m3
Size: 6 mm 10 ~ 30mm length.
Moisture: < 10%
Ash: < 0.9%
Calorific value: 4200 ~ 4500kcal/kg
Density: 1100 ~1300kg/m3
biomass wood pellets
Ecological environmental protection pollution-free high combustion efficiency
Details
Wood pellets fuel is higher density biological pellet fuel, which is made of waste sawdust, wood shavings, lath, end cutting, broken lumber core, leftover materials as well as defective and small fire wood after crushing, screening, drying. Our raw materials is better than others, because it is from natural forest in northeast of China.
The wood pellets can be used for household and industry.Meanwhile, we have other kinds of biomass pellets for sale. Please feel free to contact us if you are interested in any product
..
packing:15kg/25kg woven bag
we have SGS DIN certificate .
Details
Wood pellets fuel is higher density biological pellet fuel, which is made of waste sawdust, wood shavings, lath, end cutting, broken lumber core, leftover materials as well as defective and small fire wood after crushing, screening, drying. Our raw materials is better than others, because it is from natural forest in northeast of China.
The wood pellets can be used for household and industry.Meanwhile, we have other kinds of biomass pellets for sale. Please feel free to contact us if you are interested in any product
..
packing:15kg/25kg woven bag
we have SGS DIN certificate .
biomass wooden pellet
Wooden Pellet
biomass pellet fuel
Low Price
Eco-Friendly
wood pellets,wooden pellets,wood pellets fuel
1) diameter: 6mm;
2) length: 10mm~30mm;
3)humidity: Less than 7.5%;
4)density: More than 1.3MT/m3;
5) ash: Less than 1.1%~ 2%;
6)calorie: 4200kcal/kg~~4500kcal/kg.
Wood Pellet Features:
1) No additives, no chemical, no harm for human beings
2) High burning efficiency, low ash
3) 6-8mm diameter, 10-30mm length pellet
Packing:
15kg/polybag, 114bags/pallet, 17tons/20FCL
Other Details:
Mini-Order: 2*20FCL
Payment terms: T/T
Delivery Time: 30days after receiving 30% deposit
HS Code: 44013000
wood pellets,wooden pellets,wood pellets fuel
biomass pellet fuel
Low Price
Eco-Friendly
wood pellets,wooden pellets,wood pellets fuel
1) diameter: 6mm;
2) length: 10mm~30mm;
3)humidity: Less than 7.5%;
4)density: More than 1.3MT/m3;
5) ash: Less than 1.1%~ 2%;
6)calorie: 4200kcal/kg~~4500kcal/kg.
Wood Pellet Features:
1) No additives, no chemical, no harm for human beings
2) High burning efficiency, low ash
3) 6-8mm diameter, 10-30mm length pellet
Packing:
15kg/polybag, 114bags/pallet, 17tons/20FCL
Other Details:
Mini-Order: 2*20FCL
Payment terms: T/T
Delivery Time: 30days after receiving 30% deposit
HS Code: 44013000
wood pellets,wooden pellets,wood pellets fuel
brequette machine for wood pellet
brequitting machine:
1) durable quality
2)convenient maintenance
3)save workforce anf power
4)low investment,quick effect
Introduction:
New type ball pressing machine is mainly used for anhydrous materials of non-ferrous and ferrous mineral powder briquette /ball making system before the smelting furnace, such as coal, coal ash, coal mud, coke powder, coking coal, iron ore concentrates, chromate ore concentrates, mgo power, copper power, chrome ore power, Lead Zinc Ore, steel slag, aluminum ash, Si-Mn mineral powder, bauxite refractory, nonferrous metal power, refractory matter, ceramic filter sand and metallurgical powder Cold pellet making industry.
Application:
It is widely used in the field of metallurgy, chemical, refractories etc, for reducing bug dust, controlling volume, recycling, easy transportation and storage. It has the properties of high efficiency, energy saving and environment protection.
Main Technical Parameter:
model
reducer
ratio
Roller size
Spindle speed
power
yield
YHQ360-2
ZQ350
1:31.5
360*250
15-17
7.5
3-5t/h
YHQ400-2
ZQ400
1:31.5
400*250
15-17
7.5
4-7t/h
YHQ430-2
ZQ400
1:31.5
430*250
15-17
7.5
5-8t/h
YHQ650-2
ZQ500
1:31.5
650*350
15-17
22
12-20t/h
YHY850-2
ZQ650
1:31.5
850*436
14-16
37
35-40t/h
YHY1000-2
ZQ850
1:31.5
1000*530
14-16
45
40-45t/h
1) durable quality
2)convenient maintenance
3)save workforce anf power
4)low investment,quick effect
Introduction:
New type ball pressing machine is mainly used for anhydrous materials of non-ferrous and ferrous mineral powder briquette /ball making system before the smelting furnace, such as coal, coal ash, coal mud, coke powder, coking coal, iron ore concentrates, chromate ore concentrates, mgo power, copper power, chrome ore power, Lead Zinc Ore, steel slag, aluminum ash, Si-Mn mineral powder, bauxite refractory, nonferrous metal power, refractory matter, ceramic filter sand and metallurgical powder Cold pellet making industry.
Application:
It is widely used in the field of metallurgy, chemical, refractories etc, for reducing bug dust, controlling volume, recycling, easy transportation and storage. It has the properties of high efficiency, energy saving and environment protection.
Main Technical Parameter:
model
reducer
ratio
Roller size
Spindle speed
power
yield
YHQ360-2
ZQ350
1:31.5
360*250
15-17
7.5
3-5t/h
YHQ400-2
ZQ400
1:31.5
400*250
15-17
7.5
4-7t/h
YHQ430-2
ZQ400
1:31.5
430*250
15-17
7.5
5-8t/h
YHQ650-2
ZQ500
1:31.5
650*350
15-17
22
12-20t/h
YHY850-2
ZQ650
1:31.5
850*436
14-16
37
35-40t/h
YHY1000-2
ZQ850
1:31.5
1000*530
14-16
45
40-45t/h
Biomass pellet machine
1. Multifunction wood pellet machine
2. High compression resistance
3. Operate at low temperature
4. High production effic
Diameter
8-12mm
Longness
10-30mm
Ash
≤2%
Calorific Value
4300-4500kcal
Moisture contant
≤8%
Sulphur content
≤1.5%
Volatilization
Above 40%
Density
1.1-1.3T/m³
Burning rate
≥95%
heat efficiency
≥85%
Detailed information
Our company has introduced into Gemanic advanced pellet pressing technology.inventing the Taper-shape roller series flat-die pellet press.they can make pellets(2-15mm),bricks(20mm*30mm),briquettes(20-30mm),which is mainly applicable to crude fiber granulation,such as:sawdust,rice husk,cotton stalk and all kinds of crop straw,home wastage,the worn out plastic and the factory reject,the material of low ashesion rate and difficult to forming,they also can be applied to low temperature pelleting,such as: biological fertilizer,organic fertilizer,compound fertilizer.It is especially confirmed to the world market of renewable compression biomass energy demand.They are our patent products.
Compared to ring-die pellet press,the ring dies pellet mills is restricted by ring diameter,its roller can not be enlarged enough, roller bearing room is smaller,so the assembly bearing are not strong enough to withstand pressure,so the problems come to being:bearings less standing abilty leads to frequent repair.
Characteristic;
1.the rollers adopts Taper-shape to make both ends line-speed consistent to die-inner and die-outer,so it avoids dislocation friction between rollers and dies,so the dies' lifetime is enlarged.This is significant difference between the similar compression formation machine.
2.It adopts screw-center adjusting pressure structure,the pressed rollers' gap can be adjusted small or big,so it can meet the different materials demand and make sure the pelleting effect.
2. High compression resistance
3. Operate at low temperature
4. High production effic
Diameter
8-12mm
Longness
10-30mm
Ash
≤2%
Calorific Value
4300-4500kcal
Moisture contant
≤8%
Sulphur content
≤1.5%
Volatilization
Above 40%
Density
1.1-1.3T/m³
Burning rate
≥95%
heat efficiency
≥85%
Detailed information
Our company has introduced into Gemanic advanced pellet pressing technology.inventing the Taper-shape roller series flat-die pellet press.they can make pellets(2-15mm),bricks(20mm*30mm),briquettes(20-30mm),which is mainly applicable to crude fiber granulation,such as:sawdust,rice husk,cotton stalk and all kinds of crop straw,home wastage,the worn out plastic and the factory reject,the material of low ashesion rate and difficult to forming,they also can be applied to low temperature pelleting,such as: biological fertilizer,organic fertilizer,compound fertilizer.It is especially confirmed to the world market of renewable compression biomass energy demand.They are our patent products.
Compared to ring-die pellet press,the ring dies pellet mills is restricted by ring diameter,its roller can not be enlarged enough, roller bearing room is smaller,so the assembly bearing are not strong enough to withstand pressure,so the problems come to being:bearings less standing abilty leads to frequent repair.
Characteristic;
1.the rollers adopts Taper-shape to make both ends line-speed consistent to die-inner and die-outer,so it avoids dislocation friction between rollers and dies,so the dies' lifetime is enlarged.This is significant difference between the similar compression formation machine.
2.It adopts screw-center adjusting pressure structure,the pressed rollers' gap can be adjusted small or big,so it can meet the different materials demand and make sure the pelleting effect.
briquette plant for wood wastes
briquette plant 1. Power: 22kw
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
briquette plant use peanut shell
1. Power: 22kw
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality warranty: 1 year
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality warranty: 1 year
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
briquette plant with crops straw
briquette plant 1. Power: 22kw
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
briquette plant with sawdust wastes
briquette plant 1. Power: 22kw
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
Thursday, October 13, 2011
briquette plants for agro-forestry wastes
1. Power: 22kw
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality warranty: 1 year
1. Brief Intro:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description:
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality warranty: 1 year
1. Brief Intro:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description:
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
briquette plants for forestry wastes
briquette plant 1. Power: 22kw
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
2. Output: 1t/h
3. Overall dimension: 2000*900*1500(mm)
4. Equipment weight: 1.3t
5. Quality
1. Brief Intro of briquette plant:
Straw fuel briquette machine is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into high density and energy fuel. Straw fuel briquette machine is widely used in household stove, heating furnace, hot water boilers, industrial boilers, etc. The product of this machine can be used to heat boiler, fireplace, etc. for warm in house.
Equipment Parameters:
1). Power: 22kw
2). Output: 1t/h
3). Overall dimension: 2000*900*1500(mm)
4). Equipment weight: 1.3t
5). Quality warranty: 1 year
2. Product Description of briquette plant
Straw coal is a kind of new-style energy with renewable, environmental protection, biomass clean and low cost. It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental protection, and solved the problem of higher industry fuel costs.
Straw coal parameters:
1). Length of raw materials: 2-50 mm
2). Moisture content of raw materials: 5-30%
3). Product shape: diameter 6~90mm
4). Product density : 0.9-1.4 g / cm3
5). Calorie :3500-5500 kcal
The finished products takes on the burning behaviour of coal. Owing to their great density the straw fuel have a calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic soild-fuel stoves as well as in industrial furnaces.
This equipment is suitable for various kinds of materials whose moisture content is less than 30%.The machine is fully automatic electric heating, can adjust the humidity of materials to address problems of congestion and not forming. The machine has advantage of simple structure, easy operation, high automation, and less labor.
3. Our advantagest of briquette plant
As a professional manufacturer in exporting charcoal/biomass briquette plants for agro-forestry wastes, we are leading a team working to exploit full set of various manufacturing and exporting briquetting equipments, including charcoal/biomass briquette machine, straw fuel briquette press, pellet mill, conveyor and grass chipper, etc.
brown wood powder
brown wood powder:
color: white or brown
moisture: less than 10%
brown wood powder:
Size: 50~325mesh
Material: poplar or hard wood.
Capacity: 500MT per month.
Colour: White or brown colour.
Packing: 25kg/bag 30kg/bag ,500kg/bag in bulk packing or as requested.
Quality: Ash content under 15%, moisture under 10%.
Usage: Suitable for making paper, incense stick, WPC products,
process leather, juaomufen,highway, coating, wire, cat litter, household products stuffing etc.
color: white or brown
moisture: less than 10%
brown wood powder:
Size: 50~325mesh
Material: poplar or hard wood.
Capacity: 500MT per month.
Colour: White or brown colour.
Packing: 25kg/bag 30kg/bag ,500kg/bag in bulk packing or as requested.
Quality: Ash content under 15%, moisture under 10%.
Usage: Suitable for making paper, incense stick, WPC products,
process leather, juaomufen,highway, coating, wire, cat litter, household products stuffing etc.
bulk wood pellets
Bulk wood pellets
High heat output
Low ash
Certification SGS
Earth friendly
BULK WOOD PELLETS FOR SALE!
What are wood pellets?
Wood pellets are a type of wood fuel, generally made from compacted sawdust.
They are usually produced as a byproduct of sawmilling and other wood transformation activities.
The pellets are extremely dense and can be produced with a low humidity content (below 10%)
that allows them to be burned with a very high combustion efficiency.
SPECIFICATION:
Origin
China
Package
50kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4300
kcal
MOQ
2 Container
(50tons)
Ash content
<1.65%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
Diameter
8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
Our stringent quality standards apply to every pellet in every bag.
We produces wood pellets from a special blend of hardwood and softwood.
Our pellets are 100% natural wood with no additives or chemical binders
and very low ash content. They burn evenly and provide long lasting consistent.
SUPPLY TO WHOLE SELLERS AND RETAILERS!
IF YOU ARE INTERESTED IN A PARTNERSHIP
DO NOT HESITATE TO CONTACT ME!
High heat output
Low ash
Certification SGS
Earth friendly
BULK WOOD PELLETS FOR SALE!
What are wood pellets?
Wood pellets are a type of wood fuel, generally made from compacted sawdust.
They are usually produced as a byproduct of sawmilling and other wood transformation activities.
The pellets are extremely dense and can be produced with a low humidity content (below 10%)
that allows them to be burned with a very high combustion efficiency.
SPECIFICATION:
Origin
China
Package
50kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4300
kcal
MOQ
2 Container
(50tons)
Ash content
<1.65%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
Diameter
8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
Our stringent quality standards apply to every pellet in every bag.
We produces wood pellets from a special blend of hardwood and softwood.
Our pellets are 100% natural wood with no additives or chemical binders
and very low ash content. They burn evenly and provide long lasting consistent.
SUPPLY TO WHOLE SELLERS AND RETAILERS!
IF YOU ARE INTERESTED IN A PARTNERSHIP
DO NOT HESITATE TO CONTACT ME!
bulk wood pellets
bulk wood pellets
1.Diameter: 6MM 8MM
2.Length: 10-30MM
3.Moisture: <8%
4.Calorie: 4200-4800KCAL/KG
Excellent Wood Pellet Standard
Ash amount: less than 0.75%
Moisture: less than 10%
Diameter: 6 mm-8mm
Length: 10mm-30mm
Made from pure pine wood , no bark
Bright, uniform surface color
No horizontal or vertical cracks
Density1100-1300kg/M3
calorific value :4300-4800kcal/kg
Uniform size: quality in production
Clear in water cup test
Non Toxic Fumes
Zero Additive
Package :PP bags
We Have Resonable And Experienced Wood pellet Production Process As Below ,We can produce Good Quality Wood Pellet .
Debarking Machine-Woodchiper Machine -Hammer Mill Crushing - Saw Dust Drying Machine-Ring Die Pellet Mill /Flat Die Pellet Mill -Mesh Belt Transporting Cooling System-High Quality Wood Pellet
1.Diameter: 6MM 8MM
2.Length: 10-30MM
3.Moisture: <8%
4.Calorie: 4200-4800KCAL/KG
Excellent Wood Pellet Standard
Ash amount: less than 0.75%
Moisture: less than 10%
Diameter: 6 mm-8mm
Length: 10mm-30mm
Made from pure pine wood , no bark
Bright, uniform surface color
No horizontal or vertical cracks
Density1100-1300kg/M3
calorific value :4300-4800kcal/kg
Uniform size: quality in production
Clear in water cup test
Non Toxic Fumes
Zero Additive
Package :PP bags
We Have Resonable And Experienced Wood pellet Production Process As Below ,We can produce Good Quality Wood Pellet .
Debarking Machine-Woodchiper Machine -Hammer Mill Crushing - Saw Dust Drying Machine-Ring Die Pellet Mill /Flat Die Pellet Mill -Mesh Belt Transporting Cooling System-High Quality Wood Pellet
bulk wood pellets
Bulk wood pellets
High energy output and efficiency
Little ash, no additives
Certification SGS
Competitive Price
BULK WOOD PELLETS !!!
Cost Stability Comparison
Wood pellets provide greater cost stability compared to fossil fuels.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A
wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels
.
Excellent Wood Pellet Standard
Origin
China
Package
500kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4400
kcal
MOQ
2Container
(50tons)
Ash content
<1.5%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
,L/C
Diameter
6mm-8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
High energy output and efficiency
Little ash, no additives
Certification SGS
Competitive Price
BULK WOOD PELLETS !!!
Cost Stability Comparison
Wood pellets provide greater cost stability compared to fossil fuels.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A
wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels
.
Excellent Wood Pellet Standard
Origin
China
Package
500kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4400
kcal
MOQ
2Container
(50tons)
Ash content
<1.5%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
,L/C
Diameter
6mm-8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
Biomass pellet machine
1 CE certificate
2 high capacity
3 vertical and ring die
4 continue working long time
Suitable to soft and hard material like wood sawdust, agriculture stalks.
1vertica;l feeding directly in place
2 .die static, roller rotating, materials centrifugal, Evenly distributed around.
3. double-layer dies, up and down dual-use, reduce the cost, enhance the efficiency, can be dual-use, high capacity, energy saving.
4. one die , different hole diameter, with different specifications to pelletize
5. macro porous die, wire joining circular tube, increasing travel, improving density
6. ring die, vertical structure, good for cooling the pelletizing room
independent and frequency discharge device, to ensure that the rate of pellet formation
Technical parameter of efficient centrifugal pellet mill
model
power
r/min
Voltage(v)
Pellet size
(mm)
Capacity(T/H)
XGJ550
straw
sawdust ricehusk
90kw
1450
380
2-10
0.8-1.5
1--2
XGJ850
260kw
380
1.8--3
2--4
2 high capacity
3 vertical and ring die
4 continue working long time
Suitable to soft and hard material like wood sawdust, agriculture stalks.
1vertica;l feeding directly in place
2 .die static, roller rotating, materials centrifugal, Evenly distributed around.
3. double-layer dies, up and down dual-use, reduce the cost, enhance the efficiency, can be dual-use, high capacity, energy saving.
4. one die , different hole diameter, with different specifications to pelletize
5. macro porous die, wire joining circular tube, increasing travel, improving density
6. ring die, vertical structure, good for cooling the pelletizing room
independent and frequency discharge device, to ensure that the rate of pellet formation
Technical parameter of efficient centrifugal pellet mill
model
power
r/min
Voltage(v)
Pellet size
(mm)
Capacity(T/H)
XGJ550
straw
sawdust ricehusk
90kw
1450
380
2-10
0.8-1.5
1--2
XGJ850
260kw
380
1.8--3
2--4
bulk wood pellets
Bulk wood pellets
High BTU'S
Low ash, no additives
Certification SGS
Earth friendly
BULK WOOD PELLETS FOR SALE !!!
Cost Stability Comparison
Wood pellets provide greater cost stability compared to fossil fuels.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A
wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels
.
Excellent Wood Pellet Standard
Origin
China
Package
15kg/bag and bulk
Certification
SGS
Availability
2000M/T
Caloric value
4600
kcal
MOQ
1Container
(25tons)
Ash content
<0.76%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
Diameter
8mm
Delivery time
Within one month
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
High BTU'S
Low ash, no additives
Certification SGS
Earth friendly
BULK WOOD PELLETS FOR SALE !!!
Cost Stability Comparison
Wood pellets provide greater cost stability compared to fossil fuels.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A
wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels
.
Excellent Wood Pellet Standard
Origin
China
Package
15kg/bag and bulk
Certification
SGS
Availability
2000M/T
Caloric value
4600
kcal
MOQ
1Container
(25tons)
Ash content
<0.76%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
Diameter
8mm
Delivery time
Within one month
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
bulk wood pellets
Bulk wood pellets
High energy output and efficiency
Little ash, no additives
Certification SGS
Competitive Price
BULK WOOD PELLETS !!!
Cost Stability Comparison
Wood pellets provide greater cost stability compared to fossil fuels.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A
wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels
.
Excellent Wood Pellet Standard
Origin
China
Package
500kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4400
kcal
MOQ
2Container
(50tons)
Ash content
<1.62%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
,L/C
Diameter
6mm-8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
High energy output and efficiency
Little ash, no additives
Certification SGS
Competitive Price
BULK WOOD PELLETS !!!
Cost Stability Comparison
Wood pellets provide greater cost stability compared to fossil fuels.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A
wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels
.
Excellent Wood Pellet Standard
Origin
China
Package
500kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4400
kcal
MOQ
2Container
(50tons)
Ash content
<1.62%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
,L/C
Diameter
6mm-8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
bulk wood pellets
Bulk wood pellets
High energy output and efficiency
Little ash, no additives
Certification SGS
Competitive Price
BULK WOOD PELLETS !!!
Cost Stability Comparison
Wood pellets provide greater cost stability compared to fossil fuels.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A
wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels
.
Excellent Wood Pellet Standard
Origin
China
Package
500kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4400
kcal
MOQ
2Container
(50tons)
Ash content
<1.62%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
,L/C
Diameter
6mm-8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
High energy output and efficiency
Little ash, no additives
Certification SGS
Competitive Price
BULK WOOD PELLETS !!!
Cost Stability Comparison
Wood pellets provide greater cost stability compared to fossil fuels.
As the Picture Shows Wood Pellet is A Good Choice for Heating!
A
wood pellet is a renewable and sustainable energy source, is 100% cabon neutral and provide greater cost stability compared to fossil fuels
.
Excellent Wood Pellet Standard
Origin
China
Package
500kg/bag and bulk
Certification
SGS
Availability
3000M/T
Caloric value
4400
kcal
MOQ
2Container
(50tons)
Ash content
<1.62%
Port:
Tianjin/Dalian/Lianyungang
Length
10mm-30mm
Payment
T/T
,L/C
Diameter
6mm-8mm
Delivery time
one week
OUR ADVANTAGES!!
Burn at a high temperature:
Corn straw pellet fuel creates efficiency. A more efficient product always means a more economical product, and a product that is good for the environment.
Environmentally friendly:
Corn straw
pellet fuel is manufactured from 100% natural biomass material. No chemicals or bonding agents are used in the production of wood pellets.
Renewable Energy Source:
Corn straw
pellet fuel is renewable energy source and a win-win fuel source.
Easy and Clean:
Little bag to package is easy-to-carry , and take up less space than cordwood and you can even store your wood pellets inside because they are so clean.
BENEFITS FOR USING WOOD PELLET!
a. Convenient and easy to use, and can be bulk stored in less space than other biomass
fuels
b. Have a high energy content, and the technology is highly efficient compared to other
biomass fuels
c. A clean-burning renewable fuel source
d. Price stable compared to fossil fuels
JUST CONTACT US FOR ANY QUESTIONGS.
SEND US YOUR INQUIRY AND I WILL GIVE YOU OUR BEST PRICE.
Subscribe to:
Posts (Atom)